Clear communication for paragliding with radio audio PTT headsets
We offer customized complete installations of radio audio headsets that are compatible with a variety of aviation helmets, guaranteeing reliable and interference free communication.
Audio/Telephone/Radio Headset for Charly Loop Flight and Ski Helmets.
Installation Service for Charly Loop Ski / Flight Helmets – Professional Headset Installation.Custom headset installation, consisting of:1 speaker, laterally integrated into the earpad.1 gooseneck microphone, integrated into the earpad.1 PTT (Push-To-Talk) button, integrated into the earpad.1 coiled connection cable specific to the radio.The PTT button is activated by pressing the outside of the earpad.The 20 cm long, smooth outgoing cable, securely connected to the helmet body, features MIL-grade Peltor/Nexus-compatible connectors. A coiled connection cable, approximately 50 cm long, plugs into this, establishing the link to a wide range of radio-specific connections.This is a complete installation, including all necessary cables, buttons, and audio components, customized to the customer's wishes within a helmet provided by the customer.Optionally available:A second speaker on the opposite side.Another PTT button on the opposite side.Another connectable finger PTT button, for parallel use, with an approximately 100 cm long cable.The modification generally takes 4–5 business days after order approval by our accounting department.After placing your online order, we will contact you and provide the shipping address to which you can send your helmet.If you already own radios and are unsure which connection standard to order, please send the radio along as well. Please ensure the batteries are charged.NOTE:The images show a custom headset and are for illustrative purposes only. The installation situation and the placement of the individual installed components depend on the helmet provided and can only be determined during the installation process.
Charly® No Limit Installation Service for Flight Sport Helmets / Ski Helmets
Installation Service for Charly® No Limit Ski/Flight Helmets with Fixed Earflaps. Customer-specific headset installation for helmets with fixed earflaps, consisting of:1 loudspeaker, installed laterally in the inner padding1 gooseneck microphone, permanently integrated on the side1 PTT button, integrated into the outer helmet shell1 radio-specific coiled connecting cableThe 20 cm long, smooth rear output cable, securely connected to the helmet body, features MIL-quality Peltor®/Nexus®-compatible plug connections. A coiled connecting cable of approximately 50 cm in length is plugged in here, which establishes the connection to a variety of radio-specific connectors.This is a complete installation including all necessary cables, buttons, and audio components according to customer requirements in a helmet provided by the customer.Optionally, the following are also available:A second loudspeaker on the opposite sideAnother PTT button on the opposite sideAnother attachable, parallel-use finger PTT button with a cable of approximately 100 cm in lengthThe conversion generally takes 4-5 working days after order approval by our accounting department. After you have placed your online order, we will contact you and provide you with the shipping address to which you can send your helmet. If you already own radio devices and are unsure which connection standard to order, please send the radio as well. Please note that the batteries should be charged.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation process.
HS100aero Aviation Helmet Headset for (ICOM/Yaesu/Dynascan)
HS100aero Aviation Helmet Headset, especially for ICOM / Yaesu / Dynascan Airband RadiosThis product from Uwe Evers GmbH is designed for professional aviation radios. These devices use different mechanical and electrical connection standards than standard land mobile radios (e.g., commercial or PMR446).Therefore, headsets for aviation radio technology must have some special features, such as very careful shielding of the lead, as well as an integrated impedance converter. All these special features are taken into account in this headset.The cable lengths of the HS100aero are kept relatively short. The leads from the flat loudspeaker, microphone, and PTT button end in a rubberized, Peltor®-compatible jack plug. This partial segment is installed in the helmet. The microphone and loudspeaker are placed inside the helmet, and the PTT button is inserted through a 14 mm through-hole in the helmet shell and screwed on from the back with a union nut. The lead to the radio is about 70 cm long.Special Features:Double sided flat loudspeakerHighly selective Aero adhesive microphone with impedance matching for installation in the chin areaSpecially shielded / interference-resistant cableWaterproof built-in PTT button, 14 mm installation hole requiredHigh strength and robust Nexus-/ Amphenol compatible jack plug connectionCoiled, radio specific lead, about 50 cm longAvailable for ICOM, Yaesu, and Dynascan radio connectionsScope of Delivery:1 x Helmet cable segment with flat loudspeaker, Aero microphone, impedance converter, and built-in PTT1 x Radio specific helmet lead, coiled, about 70 cm long
Installation Service for Poc® Fornix Alpine Ski Helmet
Installation Service on POC® Fornix Alpine Ski Helmets - Professional Headset Installation in Aviation Helmets.Custom Headset Installation by Uwe Evers GmbH, consisting of: 1 x Speaker, installed laterally in the ear pad 1 x Gooseneck microphone, integrated into the ear pad 1 x PTT button, integrated into the ear pad 1 x Radio-specific coiled connection cable The PTT button is operated by pressing the outside of the EarPad. The 20 cm long, smooth exit cable, connected to the helmet body with strain relief, has MIL-quality Peltor/Nexus compatible plug connections. A coiled connection cable, approx. 50 cm long, is connected here, which establishes the connection to a variety of radio-specific connections. This is a complete installation including all necessary cables, buttons and audio components according to customer requirements in a helmet provided by the customer. Optionally, the following are also available: A second speaker on the opposite side Another PTT button on the opposite side Another pluggable finger PTT button, usable in parallel, with an approx. 100 cm long cable The conversion usually takes 4-5 working days after order approval by our accounting department. After the online order has been placed, we will contact you and provide you with the shipping address to which you can send your helmet. If you already own radios and are unsure which connection standard to order, please also send the radio. Please note that the batteries should be charged. NOTE: The pictures show a custom headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components depend on the helmet supplied and can only be determined during the installation.
Paragliding / Hang Gliding Dual Com Headset Set (Icom® Air / Kenwood®)
DualCom Aviation Headset. Paragliding / Hang Gliding Dual Com Headset Set (Icom® Air / Kenwood®). This headset enables the parallel operation of Icom® aviation radio and Kenwood® radio technology on one headset.Paragliding headset with dual PTT / radio connection. The headset consists of a central connection cable that splits into two device connectors on the radio side. On the helmet side, there is a Peltor/Nexus compatible jack plug connection.The connectors do not need to be aligned with each other and lock securely by axially sliding them into each other. This plug connection is a common standard in aviation, military and professional headset systems. On the helmet side, the microphone, speakers and the two PTT buttons are connected via a multipin connector strip.The reception signals from both radio systems can be heard simultaneously on the helmet-side speakers. Depending on which PTT button is pressed, the microphone/PTT signal is directed to radio connection 1 or 2. This Dual Com variant enables parallel operation of aviation radio and civil radio technology using a common headset installation.Scope of delivery: Only the headset itself is supplied. The helmet, radios and professional installation are not included in the scope of delivery. A customer-specific installation is possible upon request.Note: The installation is complex, as many individual components have to be integrated and requires pronounced manual skill and experience. Not for beginners!
Paragliding Headset HS100p with Adhesive Button
Paragliding Headset HS100p for Closed Helmets with Adhesive PTT Button The HS100p is designed to meet the essential requirements desired for paragliding. The cable lengths of the HS-100p are kept relatively short.The leads from the flat loudspeaker, microphone, and PTT button merge into a rubberized, Peltor®-compatible jack plug. This segment is installed inside the helmet.The microphone and loudspeaker are placed inside the helmet, and the PTT button is secured on the outside of the helmet using a high quality 3M mushroom head tape. The cable leading to the radio is approximately 75 cm long.Special Features:Single sided flat loudspeakerAdhesive microphone for closed helmets, installation in the chin areaWaterproof PTT button with adhesive/mushroom-head tape on the back, for external mounting on the helmet shellHigh strength and robust Nexus-/ Amphenol compatible jack plug connectionSmooth, radio specific lead cable, approx. 75 cm longAvailable for a variety of different radio connectionsScope of Delivery:1 x Helmet cable segment with flat loudspeaker, microphone, and adhesive PTT.1 x Radio-specific helmet lead cable, smooth, approx. 70 cm long.
Paragliding Headset HS100p with Built-in PTT Button
HS100p Paragliding Headset for Closed Helmets with Built-in PTT ButtonThe HS100p was specially developed for the demands of paragliding. The cable lengths of the HS100p are kept relatively short. The leads from the flat speaker, microphone, and PTT button converge into a rubberized, Peltor® compatible jack plug. This segment is installed inside the helmet.The microphone and speaker are located inside the helmet, while the built-in PTT transmit button is inserted through a 14 mm through-hole in the helmet shell and secured on the back with a cap nut. The cable leading to the radio is approximately 75 cm long.Special Features:Single-sided flat speakerAdhesive microphone for closed helmets, for mounting in the chin areWaterproof built-in PTT button, 14 mm installation hole required!High-strength and robust Nexus / Amphenol compatible jack plug connectionSmooth, radio-specific supply cable, approx. 75 cm longCompatible with a variety of radio connectionsScope of Delivery:1 x Helmet cable segment with flat speaker, microphone, and built-in PTT button1 x Radio-specific helmet supply cable, smooth, approx. 70 cm long
Paragliding Headset HS300p for Jet Helmets with Finger PTT Button
Paragliding Headset HS300p for Jet Helmets with Finger PTT Button The HS300p is specifically tailored to the needs of paragliders, ensuring clear and reliable communication in the air. The finger PTT button offers additional flexibility.Installation:This cable segment is installed inside the helmet. The boom microphone is placed on the side of the helmet, and the speakers inside the helmet. The finger PTT lead is approximately 90 cm long and is part of the radio-specific connection cable. The lead to the radio is coiled and approximately 50 cm long.Special Features:Unilateral flat speaker and boom microphone for open helmetsWaterproof finger PTT button, with an approximately 90 cm long cableHigh-strength and robust Nexus / Amphenol compatible jack plug connectionCoiled, radio specific lead, approximately 50 cm longAvailable for a variety of radio connectionsScope of Delivery:1 x Helmet cable segment with flat speaker and microphone1 x Radio specific helmet lead as a combi cable, coiled with finger PTT
Radio Headset for NOVA® Helmets
Installation Service for Paragliding Helmets by NOVA® Customer-specific headset installation, consisting of:1 loudspeaker, installed laterally in the ear pad1 gooseneck microphone, integrated into the ear pad1 PTT button, integrated into the ear pad1 radio-specific coiled connecting cableThe PTT button is activated by pressing the outside of the ear pad. The 20 cm long, smooth output cable, strain-relieved to the helmet body, features MIL-quality Peltor®/Nexus®-compatible plug connections. A coiled connecting cable of approximately 50 cm in length is plugged in here, which establishes the connection to a variety of radio-specific connectors.This is a complete installation including all necessary cables, buttons, and audio components according to customer requirements in a helmet provided by the customer.Optionally, the following are also available:A second loudspeaker on the opposite sideAnother PTT button on the opposite sideAnother attachable, parallel-use finger PTT button with a cable of approximately 100 cm in lengthThe conversion generally takes 4-5 working days after order approval by our accounting department. After you have placed your online order, we will contact you and provide you with the shipping address to which you can send your helmet. If you already own radio devices and are unsure which connection standard to order, please send the radio as well. Please note that the batteries should be charged.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation process.
Radio headset for Plusair by Plusmax
Installation Service for PlusAir Paragliding Helmet by PlusmaxCustom headset installation, consisting of:1 x Speaker, laterally installed in the earpad1 x Gooseneck microphone, integrated into the earpad1 x PTT button, integrated into the earpad1 x Radio device-specific coiled connection cableThe PTT button is activated by pressing the outside of the earpad. The 20 cm long, smooth output cable, securely attached to the helmet body, features MIL-quality Peltor/Nexus compatible connectors. A spiral, approx. 50 cm long connection cable is plugged in here, which enables connection to a variety of radio device-specific ports.This is a complete installation including all necessary cables, buttons and audio components according to customer specifications in a helmet provided by the customer.Optional extras are available:A second speaker on the opposite sideA second PTT button on the opposite sideAn additional pluggable, parallel-use finger PTT button with approx. 100 cm long cableThe conversion usually takes 4-5 working days after order approval by our accounting department. After placing the online order, we will contact you and provide you with the delivery address to which you can send your helmet.If you already own radio devices and are unsure which connection standard to order, please also send the radio device. Please note that the batteries should be charged.NOTE: The illustrations show a custom headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components depend on the delivered helmet and can only be determined during the installation.
Radio Headset for SupAir® Pilot
Uwe Evers GmbH Installation Service for the PILOT Paragliding Helmet by SupAir® Customer-specific headset installation, consisting of:1 loudspeaker, installed laterally in the ear pad1 gooseneck microphone, integrated into the ear pad1 PTT button, integrated into the ear pad1 radio-specific coiled connecting cableThe PTT button is activated by pressing the outside of the ear pad. The 20 cm long, smooth output cable, strain-relieved to the helmet body, features MIL-quality Peltor®/Nexus®-compatible plug connections. A coiled connecting cable of approximately 50 cm in length is plugged in here, which establishes the connection to a variety of radio-specific connectors.This is a complete installation including all necessary cables, buttons, and audio components according to customer requirements in a helmet provided by the customer.Optionally, the following are also available:A second loudspeaker on the opposite sideAnother PTT button on the opposite sideAnother attachable, parallel-use finger PTT button with a cable of approximately 100 cm in lengthThe conversion generally takes 4-5 working days after order approval by our accounting department. After you have placed your online order, we will contact you and provide you with the shipping address to which you can send your helmet. If you already own radio devices and are unsure which connection standard to order, please send the radio as well. Please note that the batteries should be charged.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation process.
Radio Installation for Charly® Insider
Radio Headset Installation Service.Customer-specific headset installation with full equipment, consisting of two loudspeakers, a microphone integrated into the helmet liner, and a built-in side PTT button. The output cable features MIL-quality Peltor®/Nexus®-compatible plug connections with radio-specific plugs.Complete installation including all required hardware and cables according to customer requirements in a helmet provided by the customer.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation.
Radio Installation for ICARO® Fly Helmet
Radio Installation Service by Uwe Evers GmbH for ICARO® Fly Helmet.Customer-specific headset installation, consisting of:1 loudspeaker, installed laterally in the ear pad1 gooseneck microphone, integrated into the ear pad1 PTT button, integrated into the ear pad1 radio-specific coiled connecting cableThe PTT button is activated by pressing the outside of the ear pad. The 20 cm long, smooth output cable, strain-relieved to the helmet body, features MIL-quality Peltor®/Nexus®-compatible plug connections. A coiled connecting cable of approximately 50 cm in length is plugged in here, which establishes the connection to a variety of radio-specific connectors.This is a complete installation including all necessary cables, buttons, and audio components according to customer requirements in a helmet provided by the customer.Optionally, the following are also available:A second loudspeaker on the opposite sideAnother PTT button on the opposite sideAnother attachable, parallel-use finger PTT button with a cable of approximately 100 cm in lengthThe conversion generally takes 4-5 working days after order approval by our accounting department. After you have placed your online order, we will contact you and provide you with the shipping address to which you can send your helmet. If you already own radio devices and are unsure which connection standard to order, please send the radio as well. Please note that the batteries should be charged.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation process.
Radio installation with double PTT button for Charly No Limit helmet
Radio installation with double PTT button for Charly No Limit helmet Professional headset installation Customised headset installation for helmets with fixed side cheeks, consisting of:1 x loudspeaker, built into the side of the inner padding1 x gooseneck microphone, integrated at the side1 x PTT button, integrated in the outer helmet shell1 x radio-specific spiralised connection cableThe 20 cm long, smooth rear outgoing cable, which is firmly connected to the helmet body, has Peltor/Nexus-compatible plug connections in MIL quality.A spiral-shaped, approx. 50 cm long connection cable is plugged in here, which establishes the connection to a large number of radio-specific connections.This is a complete installation including all necessary cables, buttons and audio assemblies according to customer requirements in a helmet provided by the customer.Optional extras are also available: A second loudspeaker on the opposite sideAnother PTT button on the opposite sideAnother plug-in finger PTT button to be used in parallel with a cable approx 100 cm longThe conversion usually takes 4-5 working days after order approval by our accounts department.Once your order has been placed online, we will contact you and inform you of the delivery address to which you can send your helmet.If you already own radio equipment and are unsure which connection standard to order, please also send the radio equipment with your order.Please note that the batteries should be charged.NOTE:The illustrations show a customised headset and are for illustrative purposes only. The installation situation and the positioning of the installed individual components depend on the helmet supplied and can only be determined when the installation is carried out.
Radio Installation with Dual PTT Button for Charly® Insider
Radio Installation for Charly® Insider Flight Helmets. Customer-specific headset installation with full equipment, consisting of two loudspeakers, a microphone integrated into the inside of the helmet, a side PTT button, and an additional connection for a finger PTT. The output cable features MIL-quality Peltor®/Nexus®-compatible plug connections with radio-specific connectors.Complete installation including all required hardware and cables according to customer requirements in a helmet provided by the customer.NOTE: The illustrations show a customer-specific headset and are for illustrative purposes only. The installation situation and the placement of the installed individual components are dependent on the supplied helmet and can only be determined during the installation process.
UK-Intech Paragliding Headset Connection Cable / Replacement Cable
UK-Intech Paragliding Headset Connection Cable / Replacement CableThis connection cable serves to connect your UK-Intech Headset with common radios. The robust PU cable is approximately 100 cm long and 2.6 mm thick. It features a 90° angled 3.5-mm 4-pole jack plug and a radio-specific jack plug.The electrical contact is matched to the helmet-side connection socket of UK-Intech Headsets and is available for many radio standards.You can conveniently select the desired connector type in the order selection.The helmet-side 4-pole jack plug is provided with a locking notch that ensures a secure fit.Please note that third-party products do not feature this notch and may therefore come loose!Scope of Delivery:1 piece cable, approx. 100 cm long, with 4-pin, 90°, 3.5-mm jack plug and radio-specific connection plug (according to order selection)