Restoration and repair of classic aviation headsets
The cables of classic aviation headsets are subject to wear over time. Replacement is often difficult, especially for moulded components.
StarCom1 offers a professional repair service for a wide range of audio headsets. Our service includes the replacement of defective leads, plugs, microphones and electronic assemblies. We also realise adaptations and conversions to customer-specific connection standards.
Cable Repair and Connector Replacement for MicroAvionics® PM-100 and Compatible Headsets
Repair and replacement of worn connection cables.In addition to the coiled connection cable, this also includes the reconstruction of cable grommets and strain reliefs (materials included) on customer-supplied MicroAvionics® PM-100 headsets. Upon request, we can also chemically clean the headsets and perform a basic overhaul. Please request a separate quote for this service.
Cable Repair for Sennheiser® HMC-26
Repair / Replacement of technically worn-out cables – Rebuilding of cable grommets / bushings including materials and cleaning.Unfortunately, headsets continue to be used even with defective cable grommets. As a result, tensile forces that act on the battery housing or the ear cup via the cables are not transferred to the housing, but directly to the circuit board's plug connections. These are very delicate. If the cable connections to the circuit board are forcibly separated, an economical repair is questionable. Uwe Evers GmbH offers a sustainable repair service for this purpose. Acting in a timely manner has an advantage!
Cable Repair for Zulu lightspeed®
Repair and Replacement of Worn Cables and Housing Assemblies – Rebuilding of Cable Grommets / Bushings, including Materials and Cleaning for Customer-Provided Zulu HeadsetsUnfortunately, headsets continue to be used even with defective cable grommets. As a result, tensile forces that act on the battery housing or the ear cup via the cables are not transferred to the housing, but directly to the circuit board's plug connections.These are very delicate. If the cable connections to the circuit board are forcibly separated, an economical repair is questionable.Acting in a timely manner has an advantage!
David Clark® capsule housing replacement repair
Repair of David Clark® capsule housings Uwe Evers GmbH repair or replace defective capsule housings (e.g. microphone capsules, earphone capsules) on David Clark® headsets, including material and cleaning.
Repair Service for David Clark® PRO-X2 Headsets
Repair of Cables and Grommets on David Clark® HeadsetsUwe Evers GmbH repairs and renews headset cables and grommets, including materials and cleaning.Defective Grommets – a Common Problem Defective cable grommets are often ignored for too long. As a result, tensile forces on the cable can act directly on the circuit board's sensitive plug connections and damage them. In such cases, repair is usually no longer economical. Timely action is an advantage!Our service:Repair / replacement of technically worn-out cablesRebuilding of cable grommets / bushingsCleaning and washing, etc.
Repair Service for LIFT® KV-1 KOR Audio Installation
Repair & Optimization - Cable Feed for Bose® A20 / LIFT® Aviation KV-1 KOR We offer professional refurbishment of the cable feed or the connection point (Hirose® connection) for Bose® A20 headsets that are factory installed in LIFT® Aviation helicopter helmets of the KV-1 KOR series.This service fixes defects at the sensitive interface between the helmet and the headset module.The repair scope in detailDisassembly & Inspection: The existing Hirose® plug connection is professionally disassembled and inspected. Replacement & Soldering: If necessary, defective components are replaced with new parts and precisely re-soldered to the cable of the Bose® A20 (or A30).StarCom1 Special Solution: A decisive advantage of our repair is the integration of a strain relief specially developed by StarCom1. This is firmly connected to the connector housing.Result: This modified version is significantly more robust than the standard and guarantees high durability even under harsh operating conditions in helicopters.Scope of delivery:1 piece Repair Service for Bose® A20 / LIFT® Aviation helmet cable.
Service for Sennheiser® HMEC / HMDC Series
Repair, Modification and Service for Sennheiser® Noiseguard® Headsets HMEC 300, 305, C 400, HMDC 322Uwe Evers GmbH offers a comprehensive service for your Sennheiser® Noiseguard® headsets of the HMEC (300, 305, C 400) and HMDC 322 series, which includes:Chemical cleaning of all assembliesModification of the internal electronics from an on-board power supply to an external battery power supplyReplacement of the XLR lead with a USB connector for universal use
Washing, Cleaning, and Disinfection for David Clark®
Professional Cleaning and Refurbishment of David Clark® Aero HeadsetsDo you have a used David Clark® Aero Headset that needs a thorough cleaning?We'll take care of it!Our services:Washing and CleaningDisinfectionOther work to restore your headset to a like-new conditionPrice based on effort.