Communication technology for forest management and commercial horticulture
3M® / Peltor® Headset (MT7H79P3E) - Helmet Adapter
Refurbished 3M® / Peltor® Standard Headset with Helmet Clamp AttachmentAs part of a complete overhaul carried out by Uwe Evers GmbH, the headset was disassembled into its individual components, cleaned, and reassembled.Description: As part of the overhaul, the headset was fully disassembled, cleaned, and reassembled. All technical faults were rectified. The headset, cable, and microphone were chemically washed and cleaned, and are free from residue, contamination, and odors.Condition: The headset is in perfect technical condition and good used condition.Warranty and VAT: This item is subject to margin taxation according to § 25a of the German VAT Act (UStG), meaning VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Important Note: The designations Peltor® and 3M® are registered trademarks. The refurbishment offered here is not affiliated with the trademark owners and is an offer from Uwe Evers GmbH.Scope of Delivery: 1 piece of 3M® / Peltor® standard headset with helmet clamp attachment MT7H79P3E, black color, dynamic microphone, and Nexus TP-120 connector with NATO or Peltor wiring (choice available).
3M® / Peltor® LiteCom® Plus (MT73H7A4410WS-EU) 16 Channels / Bluetooth (Used)
Used 3M® / Peltor® LiteCom® Plus Headset (MT73H7A4410WS-EU) (16 Channels / Bluetooth®)The 3M® / Peltor® LiteCom® Plus offered here is one of the current models from approx. 2023, featuring 16 PMR446 channels and Bluetooth®.The headset is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to § 25a UStG of German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT73H7A4410WS-EU), with battery, charger, and charging cable. Without manual/accompanying documents or original packaging.
3M® / Peltor® LiteCom® Plus MT537H7A4410WS5 (used)
A used 3M® / Peltor® LiteCom® Plus Headset (MT537H7A4410WS5) with Bluetooth is offered. The headset (headband version) is almost unused and in very good condition. This article is subject to differential taxation (margin scheme) according to § 25a UStG (German VAT Act). Therefore, VAT will not be shown on the invoice. The statutory warranty is 12 months. Scope of delivery: 1 x 3M® / Peltor® LiteCom® Plus Headset MT537H7A4410WS5, headband version).
3M® / Peltor® LiteCom® Plus MT7H7P3E4410-EU (Used)
Offered here is a used 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU).The headset (helmet attachment version) is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Note:A headband version is available upon request.Please note:The battery shown in the illustration is not included in the delivery. Please check the scope of delivery!Important notice:3M® and Peltor® are registered trademarks. The product offered here is used and is not distributed by the trademark owners. The statutory warranty for this item is provided by Uwe Evers GmbH.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU, helmet mount), without battery and charger.
Cable with angled U-173/U and MP-101 microphone plugs
Cable with angled U-173/U and MP-101 microphone plugs Connection cable made of PUR (2.8 mm), kevlar reinforced, with molded MP-101 and U-173/U microphone plugs.
Double sided radio / audio retrofit for Husqvarna® Technical earmuffs
Two-Way Radio / Audio retrofit for Husqvarna® Technical earmuffs (DualCom)This service provides a professional two-way radio / audio retrofit for Husqvarna® Technical earmuffs.Note:Customers must provide two Husqvarna® Technical earmuffs. Retrofitting audio electronics voids the EN 352 PPE hearing protection certification. The earmuff manufacturer's warranty is voided.Scope of services 1..2 1 Main Capsule:Installation of a robust, electric noise cancelling gooseneck microphone with windscreen.Installation of a splash proof Push to Talk (PTT) button with a clear pressure point.Installation of a loudspeaker unit.Installation of an overhead connecting cable to the secondary capsule (second loudspeaker).Installation of an approximately 25 cm capsule side connection cable with a Peltor compatible, robust 4-pin military jack plug (Nexus-TP-120-compatible).2. Secondary capsuleInstallation of an overhead connecting cable to the main capsule (second loudspeaker). Installation of a loudspeaker unit. This radio/audio PTT retrofit ensures universal compatibility with various radio standards.A radio specific connection cable is included in the return shipment.Return shipment: The return shipment includes: The customer's retrofitted main and secondary capsules. A radio specific coiled connection cable (approximately 40 cm).Instructions and CE Certificate of Conformity from Uwe Evers GmbH. The conversion process typically takes 4-5 business days after order approval. Order Process: After online order placement, we will contact you with the delivery address for your earmuffs.If you own radio equipment and are unsure of the required connection standard, please send the radio with your order. Ensure the batteries are charged. We also offer a range of analog and digital PMR446/dPMR446 radios.
Finger PTT button, compatible with Peltor® LiteCom®
Finger PTT button, compatible with Peltor® LiteCom® This StarCom1 finger PTT button allows you to operate the radio module of the Peltor® LiteCom® system either via the integrated PTT button on the earcup or via this separate external finger PTT button. Both buttons can be used simultaneously. The external finger PTT button is especially useful when your hands are dirty or when you must wear work gloves, as it can be easily placed inside the glove. Scope of delivery:1 x Peltor® compatible finger PTT button (length approx. 70 cm).
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)The FL6BR connection cable, featuring a 7.11 mm jack plug, is a product of Uwe Evers GmbH. It connects systems with a Nexus coupling socket or PTT buttons (such as the Peltor® FL56xx adapter or similar devices) to Peltor® LiteCom headsets with a 4-pin audio interface.This cable is pin compatible with the original Peltor FL6BR cable equipped with a J11 connector.Please inquire for different length requirements.Scope of Delivery:1 x Peltor® FL6BR compatible, smooth cable with a 7.11 mm jack plug (TP-120 Nexus® / Peltor® compatible), approximately 70 cm in length.
FL6BR Spiral Peltor® LiteCom® kompatibles Kabel (Nexus® TP-120)
FL6BR Spiral Cable, compatible with Peltor® LiteCom® (Nexus® TP-120)The FL6BR connection cable with a 7.11 mm TP-120 compatible jack plug is a product of Uwe Evers GmbH. It adapts systems with a Nexus® coupling socket / PTT buttons, such as the Peltor® FL5000 adapter, to Peltor® LiteCom® headsets with a 4-pin audio interface.The cable is pin compatible with the original Peltor® FL6BR cable with a J11 plug. If you require a different length, please inquire.Scope of Delivery:1 Peltor® FL6BR compatible spiral cable with a TP-120 Nexus® / Peltor® compatible 7.11 mm jack plug. Length approx. 70 cm.The Peltor® LiteCom® headset and the Peltor® FL-56xx / SEM®52 SL PTT button are NOT included in the scope of delivery.
FL6BS / audio mono - Peltor® LiteCom® compatible cable
FL6BS / audio mono - Peltor® LiteCom® compatible cable This cable, a product of Uwe Evers GmbH, connects handheld microphones (e.g., with loudspeaker output) featuring a 2.5 mm mono jack plug socket to Peltor® LiteCom headsets with a 4 pin audio interface. The cable is pin compatible with the original Peltor® FL6BT cable. For different length requirements or a coiled version, please contact us. Scope of delivery:1 x Peltor® FL6BS compatible cable with special plug and 2.5 mm mono jack plug, approximately 70 cm in length.
FL6BT / audio mono - Peltor® LiteCom® compatible cable
FL6BT / audio mono - Peltor® LiteCom® compatible cable This cable, a product of Uwe Evers GmbH, connects handheld microphones (e.g., with loudspeaker output) featuring a 3.5 mm mono jack plug socket to Peltor® LiteCom® headsets with a 4 pin audio interface. The cable is pin compatible with the original Peltor® FL6BT cable. For different length requirements or a coiled version, please contact us. Scope of delivery:1 x Peltor® FL6BT compatible cable with special plug and 3.5 mm mono jack plug, approximately 70 cm in length.
FL6CT / MP-3 - Peltor® LiteCom compatible cable
FL6CT / MP-3 - Peltor® LiteCom compatible cable The FL6CT connection cable, featuring a 3.5 mm stereo jack plug, is a product of Uwe Evers GmbH. It allows the connection of audio MP3 stereo systems with a 3.5 mm stereo jack plug to Peltor® LiteCom headsets equipped with a 4-pin audio interface. This cable is pin compatible with the original Peltor® FL6CT cable.For different length requirements or a spiralised version, please contact us.Scope of Delivery:1 x Peltor® FL6CT compatible cable with special plug and 3.5 mm stereo jack plug, approximately 70 cm in length.
FL6CT-4 - Peltor® LiteCom compatible iPhone / Android cable
FL6CT-4 - Peltor® LiteCom® compatible iPhone / Android cable The FL6CT-4 connection cable, featuring a 3.5 mm 4 pin jack plug for iPhone or Android, is a product from Uwe Evers GmbH. It facilitates the connection of iPhone or Android smartphones with a 3.5 mm jack socket to Peltor LiteCom headsets.This cable allows for the connection of an additional phone when the Bluetooth interface is in use. For different length requirements, angled plugs, or a coiled version, please contact us.Scope of Delivery:1 x Peltor® compatible cable with 3.5 mm 4 pin jack plug for iOS / Android. Length approximately 70 cm.
Hygiene kit for Husqvarna® Technical hearing protection
Hygiene kit for Husqvarna® Technical hearing protection forest helmet. This hearing protection compatible hygiene kit from StarCom1 is designed for the maintenance and replacement of essential components in Husqvarna® Technical hearing protection systems. It ensures optimal hygiene and extends the lifespan of your earmuffs. Suitable for Husqvarna® Technical, Husqvarna® Functional, Husqvarna® Classic, Husqvarna® Arborist®, and similar models.Scope of delivery:2 x replacement earcup cushions.2 x spacer rings (for optional fitment adjustment).2 x replacement foam inserts, 20 mm thick.
One sided radio / audio retrofit for Husqvarna® Technical earmuffs
This service provides a one sided radio / audio retrofit for Husqvarna® Technical earmuffs Note:The earmuffs must be provided by the customer (client) for the retrofit. By installing the audio electronics, the customer provided earmuffs lose the EN 352 specification and are no longer certified as PPE hearing protection. Warranty claims against the earmuff manufacturer expire. Scope of Services:Installation of a robust, electric noise-cancelling gooseneck microphone with windscreen.Installation of a splash-proof PTT button with a clearly defined pressure point on the outside of the earmuff.Installation of a loudspeaker unit.Installation of an earmuff side, approximately 25 cm long connection cable with Peltor compatible, robust 4-pin military jack plug (Nexus-TP-120-compatible).This radio / audio PTT retrofit allows the audio system to be used universally with many radio standards. This includes a radio specific connection cable, included in the return shipment.Return Consignment: The return consignment includes, in summary:The capsule with integrated audio unit sent by the customer for retrofitting.Radio specific, spiralized connection cable with a length of approximately 40 cm. Instruction manual and CE certificate of conformity from Uwe Evers GmbH. The conversion usually takes 4-5 working days after order approval by our accounting department. Once the order has been placed online, we will contact you and inform you of the delivery address to which you can send your capsule. If you already own radio equipment and are unsure which connection standard to order, please also send the radio equipment with your order. Please note that the batteries should be charged. Please also note our range of analog and digital PMR446/dPMR446 radios.
One sided radio / audio retrofit for Pfanner® Protos® earmuffs
This service provides a one sided radio / audio retrofit for Pfanner® Protos® earmuffs. Note:The earmuffs must be provided by the customer (client) for the retrofit. By installing the audio electronics, the customer provided earmuffs lose the EN 352 specification and are no longer certified as PPE hearing protection. Warranty claims against the earmuff manufacturer expire. Scope of Services:Installation of a robust, electric noise-cancelling gooseneck microphone with windscreen.Installation of a splash proof PTT button with a clearly defined pressure point on the outside of the earmuff.Installation of a loudspeaker unit.Installation of an earmuff side, approximately 25 cm long connection cable with Peltor compatible, robust 4-pin military jack plug (Nexus-TP-120-compatible).This radio / audio PTT retrofit allows the audio system to be used universally with many radio standards. This includes a radio specific connection cable, included in the return shipment.Return Consignment: The return consignment includes, in summary:The capsule with integrated audio unit sent by the customer for retrofitting.Radio specific, spiralized connection cable with a length of approximately 40 cm. Instruction manual and CE certificate of conformity from Uwe Evers GmbH. The conversion usually takes 4-5 working days after order approval by our accounting department. Once the order has been placed online, we will contact you and inform you of the delivery address to which you can send your capsule. If you already own radio equipment and are unsure which connection standard to order, please also send the radio equipment with your order. Please note that the batteries should be charged. Please also note our range of analog and digital PMR446 / dPMR446 radios.
One sided radio / audio retrofit for Stihl® compatible earmuffs
This service provides a one sided radio / audio retrofit for Stihl® compatible earmuffs. Note: The earmuffs must be provided by the customer (client) for the retrofit. By installing the audio electronics, the customer provided earmuffs lose the EN 352 specification and are no longer certified as PPE hearing protection. Warranty claims against the earmuff manufacturer expire. Scope of Services: Installation of a robust, electric noise cancelling boom microphone with windscreen.Installation of a splash-proof PTT button with a clearly defined pressure point on the outside of the earmuff.Installation of a loudspeaker unit.Installation of an earmuff side, approximately 25 cm long connection cable with Peltor compatible, robust 4-pin military jack plug (Nexus-TP-120-compatible).This radio / audio PTT retrofit allows the audio system to be used universally with many radio standards. This includes a radio specific connection cable, included in the return shipment.Return Consignment: The return consignment includes, in summary:The capsule with integrated audio unit sent by the customer for retrofitting.Radio specific, spiralized connection cable with a length of approximately 40 cm. Instruction manual and CE certificate of conformity from Uwe Evers GmbH. The conversion usually takes 4-5 working days after order approval by our accounting department. Once the order has been placed online, we will contact you and inform you of the delivery address to which you can send your capsule. If you already own radio equipment and are unsure which connection standard to order, please also send the radio equipment with your order. Please note that the batteries should be charged. Please also note our range of analog and digital PMR446 / dPMR446 radios.
Peltor® compatible flex cable FL6U-21 for Motorola 2-pin GP300 / CP040
Peltor® compatible flex cable FL6U-21 for Motorola® 2-pin GP300 / CP040 The FL6U-21 flex cable by Uwe Evers GmbH is compatible with Peltor® intercom systems and hearing protection headsets, enabling their use with Motorola® GP300, CP040, and similar radios equipped with a 2.5/3.5 mm double socket.This cable is pin compatible with the original Peltor® FL6U-21 cable.Scope of delivery:1 x spiral cable with Peltor® Audio compatible special plug and 2.5/3.5 mm Motorola GP double plug.
Pfanner® Protos® Radio Headbands for Peltor Earmuffs
Pfanner® Protos® Radio Headbands for Peltor Earmuffs These headbands adapt Peltor® earmuffs for use with Pfanner® Protos® integral helmets. Pfanner currently offers Protos® integral helmets with specialized Peltor® radio earmuff mounting brackets. These brackets share the fundamental design of standard Pfanner® Protos® retaining brackets but feature an enlarged recess on the underside.These mounting brackets are available in two configurations:With microphone spigot (article number: 203019-10-20)Without microphone spigot (article number: 203019-10-10)This technical adaptation allows for the integration of various certified Peltor® hearing protection products, including:3M® Peltor® LiteCom Plus Communication Solution3M® Peltor® WS Alert XP™ Communication Solution3M® Peltor® WS LiteCom™ Communication Solution3M® Peltor® WS ProTac XP Radio™Scope of Delivery:1 x Pfanner® Protos® radio headband with microphone spigot1 x Pfanner® Protos® radio headband without microphone spigot
PTT switch dongle for Pfanner® Protos® capsule
Customized PTT switch dongle for Pfanner® Protos® capsules. This StarCom1 PTT switch dongle adds a remote, latching PTT button. This plug in button integrates a secondary PTT switch into the supply line, supplementing the standard configuration.It's designed for situations, such as winch operation, where the side mounted PTT button is inaccessible. The dongle simulates a continuous PTT press.Note:This is an optional upgrade for the Pfanner® Protos® conversion service.Scope of Delivery:1 x Installation of a cable mounted, latching PTT button.
Refurbished Peltor® LiteCom Basic headset with Pfanner® helmet adapter
Used and Refurbished Peltor® LiteCom Basic headset (MT53H7P3E4400-EU) with Pfanner® helmet adapter. The Peltor® LiteCom Basic headset (MT53H7P3E4400-EU) with Pfanner® helmet adapter. This version can be plugged directly into Pfanner® Protos helmets. In excellent, refurbished condition with slight visible signs of use.Professionally refurbished by Uwe Evers GmbH, this headset has been completely washed, disinfected, and fitted with a new overhead cable. It is free of adhesions, dirt, and odours.Please refer to the detailed photos.This item is subject to differential taxation under § 25a UStG. Therefore, VAT is not shown on the invoice.The statutory warranty period is 12 months.As part of a complete overhaul, the headset (MT53H7A4400) was disassembled into its individual components, cleaned and reassembled. All technical faults were rectified. The capsule housing, cable and microphone have been chemically cleaned and are free of adhesions, impurities and odours.The headset is in excellent used condition.Scope of delivery:1 x Used Peltor® LiteCom Basic headset with Pfanner® helmet adapter; without original packaging, without instructions, and without batteries.
Refurbished Peltor® LiteCom® Basic Headset - used / second-hand
Used and refurbished Peltor® LiteCom® Basic MT53H7P3E4400-EU The Peltor® LiteCom Basic headset (MT53H7P3E4400-EU). In excellent, refurbished condition with slight visible signs of use.Professionally refurbished by Uwe Evers GmbH, this headset has been completely washed, disinfected, and fitted with a new overhead cable. It is free of adhesions, dirt, and odours.Please refer to the detailed photos.This item is subject to differential taxation under § 25a UStG. Therefore, VAT is not shown on the invoice.The statutory warranty period is 12 months.As part of a complete overhaul, the headset (MT53H7A4400) was disassembled into its individual components, cleaned and reassembled. All technical faults were rectified. The capsule housing, cable and microphone have been chemically cleaned and are free of adhesions, impurities and odours.The headset is in excellent used condition.Scope of delivery:1 x Used Peltor® LiteCom Basic headset with helmet adapter; without original packaging, without instructions, and without batteries.
Refurbished Peltor® LiteCom® Basic PMR446 Headset
Used 3M® / Peltor® LiteCom Basic Headset (MT53H7A4400, headband) with slight signs of wear. Note: A helmet mounted version is available on request.This item is subject to differential taxation under § 25a UStG. Therefore, VAT is not shown on the invoice. The statutory warranty period is 12 months.As part of a complete overhaul by Uwe Evers GmbH, the headset (MT53H7A4400) was disassembled, cleaned, and reassembled. All technical faults were rectified. The headset, cable and microphone have been chemically cleaned and are free of adhesions, impurities and odours. The headset is in excellent used condition.Scope of delivery:1 x Used Peltor® LiteCom® Basic Headset, without original packaging, without instructions, and without batteries.
Refurbished Peltor® WS Bluetooth Headset (MT53H7AW2S)
Refurbished Peltor® WS Bluetooth Headset (MT53H7AW2S). Used Peltor® WS Bluetooth Headset (MT53H7AW2S, headband). The headset enables Bluetooth connection with a smartphone and call acceptance via a button on the back.Refurbished by Uwe Evers GmbH and in excellent condition, with slight visible signs of use. Completely washed and disinfected, with new overhead cable, free of adhesions and odours.Please refer to the detailed photos.This item is subject to differential taxation under § 25a UStG. Therefore, VAT is not shown on the invoice. The statutory warranty period is 12 months.During a complete overhaul, the headset was disassembled into its individual components, cleaned and reassembled. All technical faults were rectified.The capsule housing, cable, and microphone were chemically cleaned and are free of buildup, impurities, and odors. The headset is in excellent used condition.Scope of delivery:1 x Used Peltor® WS Bluetooth Headset (MT53H7AW2S, headband), without original packaging, without instructions, and without AA batteries"