Communication headsets for industry, construction and maintenance
Coloured 3M® / Peltor® compatible headbands
Coloured 3M® / Peltor® compatible headbands. These headbands from StarCom1, compatible with Peltor® capsule connectors, are available in various colours and are suitable replacements for worn / damaged Peltor® headset headbands.The four available colours enable occupational group specific identification of headsets. The headbands are also suitable as replacements for Peltor® Tactical headsets or headsets from the LiteCom® series, where the electrical cable routing is an integral part of the headband.Features:Compatible with Peltor® capsule connectors.Various colours to choose from.Spare part for Peltor® headband and LiteCom headsets.Advantages:Easy replacement.Longer service life of headsets.Occupational group specific labelling possible.Scope of delivery:1 x Peltor® compatible headband with coloured cover.
3M® / PELTOR® Audio Headset Compatible with OTS® MK-7 Buddy Line
3M® / PELTOR® Headset Compatible with OTS® MK-7 Buddy LineCompatibility provided by StarCom1 connection cable manufactured by Uwe Evers GmbH.The 3M® / PELTOR® CH-3 FLX2 is an audio headset and professional communication solution. It was specifically developed for environments where reliable audio communication in high-noise surroundings is essential.Compatibility with the OTS® MK-7 Buddy Line is achieved via a StarCom1 connection cable manufactured at the Aurich facility. This cable enables the 3M® / PELTOR® CH-3 FLX2 to be connected directly to the OTS® MK-7 Buddy Line system.Important Note: This cable is a product manufactured by Uwe Evers GmbH and is not an original product of OTS® or 3M® / Peltor®.The headband variant of the CH-3 FLX2 (MT74H52A-110) features a dynamic microphone and passive audio electronics. The modular FLX2 connection system allows flexible connection via device-specific adapter cables to two-way radios, smartphones, intercom systems, or PTT adapters.Its ergonomic design ensures high wear comfort even during extended use. The wide, soft sealing rings and elastic headband minimize pressure points. The sealing rings are easily replaceable, enhancing hygiene and durability. The robust earcups are made of impact-resistant material immune to solvents, making them ideal for use in industry, construction, and agriculture.Features:Single Number Rating (SNR): 32 dBMicrophone: Splash-proof dynamic microphone with adjustable boom and noise cancellationPassive audio electronicsConnector on Headset: 6-pin Mini-XLR interfaceWeight: approx. 290 gScope of Delivery:1 piece 3M® / PELTOR® CH-3 FLX2 audio headset with headband (MT74H52A-110)1 piece StarCom1 connection cable suitable for OTS® MK-7 Buddy Line
3M® / PELTOR® Audio Headset Compatible with ScubaCom® O2D
3M® / PELTOR® Headset Compatible with ScubaCom® O2DCompatibility provided by StarCom1 connection cable manufactured by Uwe Evers GmbH.The 3M® / PELTOR® CH-3 FLX2 is an audio headset and professional communication solution. It was specifically developed for environments where reliable audio communication in high-noise surroundings is essential.Compatibility with the ScubaCom® O2D is achieved via a StarCom1 connection cable manufactured at the Aurich facility. This cable enables the 3M® / PELTOR® CH-3 FLX2 to be connected directly to the ScubaCom® O2D system. Important Note: This cable is a product manufactured by Uwe Evers GmbH and is not an original product of ScubaCom® or 3M® / Peltor®.The headband variant of the CH-3 FLX2 (MT74H52A-110) features a dynamic microphone and passive audio electronics. The modular FLX2 connection system allows flexible connection via device-specific adapter cables to two-way radios, smartphones, intercom systems, or PTT adapters.Its ergonomic design ensures high wear comfort even during extended use. The wide, soft sealing rings and elastic headband minimize pressure points. The sealing rings are easily replaceable, enhancing hygiene and durability. The robust earcups are made of impact-resistant material immune to solvents, making them ideal for use in industry, construction, and agriculture.Features:Single Number Rating (SNR): 32 dBMicrophone: Splash-proof dynamic microphone with adjustable boom and noise cancellationPassive audio electronicsConnector on Headset: 6-pin Mini-XLR interfaceWeight: approx. 290 gScope of Delivery:1 piece 3M® / PELTOR® CH-3 FLX2 audio headset with headband (MT74H52A-110)1 piece StarCom1 connection cable suitable for ScubaCom® O2D
3M® / PELTOR® CH-3 FLX2 Hearing Protection Headset (MT74H52A-110) - Headband
3M® / PELTOR® CH-3 FLX2 Hearing Protection Headset (MT74H52A-110)The 3M® / PELTOR® CH-3 FLX2 is more than just hearing protection compliant with EN 352—it is a professional communication solution. It was specifically developed for environments where reliable audio communication is essential despite high noise levels.The headband variant of the CH-3 FLX2 (MT74H52A-110) features a dynamic microphone and passive audio electronics. The modular FLX2 connection system allows flexible connection via device-specific adapter cables to two-way radios, smartphones, intercom systems, or PTT adapters.Its ergonomic design ensures high wear comfort even during extended use. The wide, soft sealing rings and elastic headband minimize pressure points.The sealing rings are easily replaceable, enhancing hygiene and durability. The robust earcups are made of an impact-resistant material that is immune to solvents, making them ideal for use in industry, construction, and agriculture.Features:Single Number Rating (SNR): 32 dBMicrophone: Splash-proof dynamic microphone with adjustable boom and noise cancellationPassive audio electronicsConnector: 6-pin Mini-XLR interfaceWeight: approx. 290 gCertification: EN 352 / (Personal Protective Equipment, PPE)Scope of Delivery:1 piece 3M® / PELTOR® CH-3 FLX2 hearing protection headset with headband (MT74H52A-110)
3M® / PELTOR® CH-3 FLX2 Hearing Protection Headset (MT74H52P3E-110) - Helmet Attachment
3M® / PELTOR® CH-3 FLX2 Hearing Protection Headset (MT74H52P3E-110) - Helmet AttachmentThe 3M® / PELTOR® CH-3 FLX2 is more than a hearing protector according to EN 352—it is a professional communication solution. It was specially developed for environments where reliable audio communication is essential despite high noise levels.The helmet attachment variant of the CH-3 FLX2 MT74H52P3E-110 features a dynamic microphone and passive audio electronics. The modular FLX2 connection system allows the headset to be flexibly connected to two-way radios, smartphones, intercom systems, or PTT adapters via device-specific adapter cables.The ergonomic design ensures high comfort even during extended wear. Wide, soft sealing cushions and an elastic headband mechanism minimize pressure points.The sealing rings are easy to replace, enhancing hygiene and longevity. The robust earcups are made of an impact-resistant material that is immune to solvents, making it ideal for use in industry, construction, and agriculture.Features:Single Number Rating (SNR): 32 dBMicrophone: Splash-proof dynamic microphone with adjustable boom and noise cancellationPassive audio electronicsConnection: 6-pin Mini-XLR interfaceWeight: approx. 290 gCertification: EN 352 / (Personal Protective Equipment, PPE)Scope of Delivery:1 piece 3M® / PELTOR® CH-3 FLX2 hearing protection headset for helmet attachment (MT74H52P3E-110)
3M® / Peltor® Headset (MT7H79P3E) - Helmet Adapter
Refurbished 3M® / Peltor® Standard Headset with Helmet Clamp AttachmentAs part of a complete overhaul carried out by Uwe Evers GmbH, the headset was disassembled into its individual components, cleaned, and reassembled.Description: As part of the overhaul, the headset was fully disassembled, cleaned, and reassembled. All technical faults were rectified. The headset, cable, and microphone were chemically washed and cleaned, and are free from residue, contamination, and odors.Condition: The headset is in perfect technical condition and good used condition.Warranty and VAT: This item is subject to margin taxation according to § 25a of the German VAT Act (UStG), meaning VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Important Note: The designations Peltor® and 3M® are registered trademarks. The refurbishment offered here is not affiliated with the trademark owners and is an offer from Uwe Evers GmbH.Scope of Delivery: 1 piece of 3M® / Peltor® standard headset with helmet clamp attachment MT7H79P3E, black color, dynamic microphone, and Nexus TP-120 connector with NATO or Peltor wiring (choice available).
3M® / Peltor® LiteCom® Basic MT753H7A4400 (used)
3M® / Peltor® LiteCom® Basic MT753H7A4400 (used)Uwe Evers GmbH offers a used 3M® / Peltor® LiteCom® Basic headset (MT53H7A4400).The headset (headband version) is visually unused and in very good condition.This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice.The statutory warranty is 12 months.Note:A variant with helmet mount attachment is available upon request.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Basic headset (MT53H7A4400, headband version)
3M® / Peltor® LiteCom® Plus (MT73H7A4410WS-EU) 16 Channels / Bluetooth (Used)
Used 3M® / Peltor® LiteCom® Plus Headset (MT73H7A4410WS-EU) (16 Channels / Bluetooth®)The 3M® / Peltor® LiteCom® Plus offered here is one of the current models from approx. 2023, featuring 16 PMR446 channels and Bluetooth®.The headset is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to § 25a UStG of German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT73H7A4410WS-EU), with battery, charger, and charging cable. Without manual/accompanying documents or original packaging.
3M® / Peltor® LiteCom® Plus MT537H7A4410WS5 (used)
A used 3M® / Peltor® LiteCom® Plus Headset (MT537H7A4410WS5) with Bluetooth is offered. The headset (headband version) is almost unused and in very good condition. This article is subject to differential taxation (margin scheme) according to § 25a UStG (German VAT Act). Therefore, VAT will not be shown on the invoice. The statutory warranty is 12 months. Scope of delivery: 1 x 3M® / Peltor® LiteCom® Plus Headset MT537H7A4410WS5, headband version).
3M® / Peltor® LiteCom® Plus MT7H7P3E4410-EU (Used)
Offered here is a used 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU).The headset (helmet attachment version) is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Note:A headband version is available upon request.Please note:The battery shown in the illustration is not included in the delivery. Please check the scope of delivery!Important notice:3M® and Peltor® are registered trademarks. The product offered here is used and is not distributed by the trademark owners. The statutory warranty for this item is provided by Uwe Evers GmbH.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU, helmet mount), without battery and charger.
Audio Adapter Cable for 3M® MT20H682FB-101 ComTac® Headsets
Audio Adapter Cable for Connecting 3M® MT20H682FB-101 ComTac® Headsets to NATO or Peltor® Wired InterfacesComTac® headsets whose model reference ends with the suffix 101 feature a less common special pinout, often referred to as "stereo pinout."With the StarCom1 FK-101 P/N adapter cable, these headsets can be operated on many standard systems using NATO or Peltor® wiring configurations.Scope of Delivery:1 x Adapter cable with galvanic isolation, total length approx. 25 cm.
Dual PTT button for parallel operation of two radios with a single headset
Professionally manufactured dual PTT button for operating two radios simultaneously with a single headset.The large round PTT housing features a large, easy-to-use push button for the primary PTT function and a smaller side button for the secondary PTT function.The two audio-side plug connections are galvanically isolated to ensure interference-free and independent operation across different radio systems.The PTT button is custom-built according to individual client specifications to perfectly match specific operational requirements.Technical Features:Robust and resilient housing.Large, intuitive control elements for easy operation.Separate PTT control for each radio.Simultaneous and independent communication via two radios.Galvanic isolation of audio outputs.Custom build tailored to individual specifications.Splash-proof and durable design.Compatible with Peltor® or NATO connection standards.Compatible with a wide variety of radio connectors.Scope of Delivery:1 piece splash-proof inline dual PTT button, with coiled cable and device-specific connector plug.
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)The FL6BR connection cable, featuring a 7.11 mm jack plug, is a product of Uwe Evers GmbH. It connects systems with a Nexus coupling socket or PTT buttons (such as the Peltor® FL56xx adapter or similar devices) to Peltor® LiteCom headsets with a 4-pin audio interface.This cable is pin compatible with the original Peltor FL6BR cable equipped with a J11 connector.Please inquire for different length requirements.Scope of Delivery:1 x Peltor® FL6BR compatible, smooth cable with a 7.11 mm jack plug (TP-120 Nexus® / Peltor® compatible), approximately 70 cm in length.
FL6BR Spiral Peltor® LiteCom® kompatibles Kabel (Nexus® TP-120)
FL6BR Spiral Cable, compatible with Peltor® LiteCom® (Nexus® TP-120)The FL6BR connection cable with a 7.11 mm TP-120 compatible jack plug is a product of Uwe Evers GmbH. It adapts systems with a Nexus® coupling socket / PTT buttons, such as the Peltor® FL5000 adapter, to Peltor® LiteCom® headsets with a 4-pin audio interface.The cable is pin compatible with the original Peltor® FL6BR cable with a J11 plug. If you require a different length, please inquire.Scope of Delivery:1 Peltor® FL6BR compatible spiral cable with a TP-120 Nexus® / Peltor® compatible 7.11 mm jack plug. Length approx. 70 cm.The Peltor® LiteCom® headset and the Peltor® FL-56xx / SEM®52 SL PTT button are NOT included in the scope of delivery.
FL6U-31 Peltor compatible flex cable for Midland® / ALAN® / Icom® radios
FL6U-31 Peltor compatible flex cable for Midland® / ALAN® / Icom® radios The FL6U-31 flex cable from Uwe Evers GmbH, electrically compatible with the Peltor® FL6U-31, is used to connect Midland® /ALAN® / Icom® radios with 2.5/3.5 mm double jack plugs to Peltor® intercom systems and hearing protection headsets. The plug on the radio, which is angled at 90°, connects to Midland/ALAN/Icom radios.The illustration shows an example of a Peltor FMT120 intercom system and a Midland G7 PMR446 radio connected with the FL6U-31 adapter cable. Please note that the Peltor® FMT120 intercom system and the radio in the illustration are not included in the package contents.Specifications: Cable length: Coiled cable (length: 40-100 cm)Connections: Peltor audio-compatible 5-pin special plug, 2.5 / 3.5 mm standard Midland® / ALAN® double jack plug (90° angled)Cable Material: PUR 4.6 mm Compatible radio models: ALAN® / Midlland® 2 pin and similar Package contents: 1 x spiral cable (length: 40-100 cm) with Peltor audio compatible 5-pin special plug and 2.5 / 3.5 mm standard Midland® / ALAN® double jack plug
FLX2 - 101 Sepura® STP compatible radio connection cable for Peltor® / 3M® CH-3 series
FLX2 -101 Sepura® STP compatible radio connection cable for Peltor® / 3M® CH-3 series. This FLX2-101 Sepura® STP compatible radio connection cable is specifically designed for Peltor® / 3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x FLX2-101 Sepura® STP copatible radio connection cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.
FLX2 63-50 Motorola® MTP850 Compatible Radio Connection Cable for Peltor® / 3M® CH-3 Series
FLX2 63-50 Motorola® MTP850 Compatible Radio Connection Cable for Peltor® / 3M® CH-3 SeriesThis Motorola® MTP850 compatible radio connection cable is specifically designed for Peltor® / 3M® CH-3 series headsets ending in xxxxxx-111 in their product designation.The 3M® / Peltor® CH3 headset series is available in a wide range of versions. The manufacturer part number (e.g., MT74H52P3E-111) indicates not only the mechanical mounting type (such as headband or helmet attachment), but also critical electrical specifications that dictate the correct radio connection cable.The last three digits of the product code are decisive:xxxxxxxx-110: The suffix "110" designates a Dual-Com headset with a dynamic gooseneck microphone.xxxxxxxx-111: The suffix "111" designates a Dual-Com headset with a dynamic gooseneck microphone and built-in PTT button.The FLX2 cable offered here is exclusively compatible with 3M® / Peltor® CH-3 headsets ending in xxxxxxxx-111—meaning headsets equipped with an integrated rear-mounted PTT button.Key Features of Starcom1 FLX2 Connection Cables:Available with various radio-specific connectors.Coiled cable body with high recoil memory.Industrial-grade PUR cable jacket.6-pin mini-XLR connector, compatible with 3M® / Peltor® CH-3 models ending in xxxxx-111.Unstretched length: approx. 65 cm.Custom lengths available upon request.If you are uncertain about identifying your specific model version, feel free to contact us.Scope of Delivery:1 x Motorola® FLX2 63-50 compatible connection cable for Peltor® / 3M® CH-3 series headsets ending in "111".
FLX2 Alan® / Midland® 2-Pin Cable Compatible with Peltor® CH-3
Alan® / Midland® 2-Pin Compatible Radio Connection Cable for Peltor® / 3M® CH-3 SeriesThis Alan® / Midland® 2-pin compatible radio connection cable is specifically designed for Peltor® / 3M® CH-3 series headsets ending in xxxxxx-111 in their product designation.The 3M® / Peltor® CH3 headset series is available in a wide range of versions. The manufacturer part number (e.g., MT74H52P3E-111) indicates not only the mechanical mounting type (such as headband or helmet attachment), but also critical electrical specifications that dictate the correct radio connection cable.The last three digits of the product code are decisive:xxxxxxxx-110: The suffix "110" designates a Dual-Com headset with a dynamic gooseneck microphone.xxxxxxxx-111: The suffix "111" designates a Dual-Com headset with a dynamic gooseneck microphone and built-in PTT button.The FLX2 cable offered here is exclusively compatible with 3M® / Peltor® CH-3 headsets ending in xxxxxxxx-111—meaning headsets equipped with an integrated rear-mounted PTT button.Key Features of Starcom1 FLX2 Connection Cables:Available with various radio-specific connectors.Coiled cable body with high recoil memory.Industrial-grade PUR cable jacket.6-pin mini-XLR connector, compatible with 3M® / Peltor® CH-3 models ending in xxxxx-111.Unstretched length: approx. 65 cm.Custom lengths available upon request.If you are uncertain about identifying your specific model version, feel free to contact us.Scope of Delivery:1 x Alan® / Midland® 2-pin connection cable for Peltor® / 3M® CH-3 series headsets ending in "111".
FLX2 Wintec® LP-4502 compatible radio connection cable for Peltor® / 3M® CH-3 series
Wintec® lP-4502 compatible radio connection cable for Peltor® / 3M® CH-3 series. This Wintec® lP-4502 compatible radio connection cable is specifically designed for Peltor® / 3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x radio specific connection cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.
FLX2 Yaesu® 1 pin compatible radio connection cable for Peltor® / 3M® CH-3 series
FLX2 Yaesu® 1 pin compatible radio connection cable for Peltor® / 3M® CH-3 series. Note: This cable is not compatible with Yaesu® FTA series aircraft radios. Contact us for details. This Yaesu® 1 pin compatible radio connection cable is specifically designed for Peltor® / 3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x FLX2 Yaesu® radio cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.
FLX2-21 Motorola® 2-Pin Compatible Radio Connection Cable for Peltor® / 3M® CH-3 Series
FLX2-21 Motorola® 2-Pin Compatible Radio Connection Cable for Peltor® / 3M® CH-3 SeriesThis Motorola® 2-pin compatible radio connection cable is specifically designed for Peltor® / 3M® CH-3 series headsets ending in xxxxxx-111 in their product designation.The 3M® / Peltor® CH3 headset series is available in a wide range of versions. The manufacturer part number (e.g., MT74H52P3E-111) indicates not only the mechanical mounting type (such as headband or helmet attachment), but also critical electrical specifications that dictate the correct radio connection cable.The last three digits of the product code are decisive:xxxxxxxx-110: The suffix "110" designates a Dual-Com headset with a dynamic gooseneck microphone.xxxxxxxx-111: The suffix "111" designates a Dual-Com headset with a dynamic gooseneck microphone and built-in PTT button.The FLX2 cable offered here is exclusively compatible with 3M® / Peltor® CH-3 headsets ending in xxxxxxxx-111—meaning headsets equipped with an integrated rear-mounted PTT button.Key Features of Starcom1 FLX2 Connection Cables:Available with various radio-specific connectors.Coiled cable body with high recoil memory.Industrial-grade PUR cable jacket.6-pin mini-XLR connector, compatible with 3M® / Peltor® CH-3 models ending in xxxxx-111.Unstretched length: approx. 65 cm.Custom lengths available upon request.If you are uncertain about identifying your specific model version, feel free to contact us.Scope of Delivery:1 x FLX2-21 Motorola® 2-pin connection cable for Peltor® / 3M® CH-3 series headsets ending in "111".
FLX2-35 Icom 2 Pin compatible radio connection cable for Peltor® / 3M® CH-3 series
FLX2-35 Icom® 2 pin compatible radio connection cable for Peltor® / 3M® CH-3 series. This Icom 2 Pin compatible radio connection cable is specifically designed for Peltor® / 3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x FLX2-35 Icom® 2 pin radio cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.
FLX2-36 Kenwood® 2 Pin compatible radio connection cable for Peltor® / 3M® CH-3 series
FLX2-36 Kenwood® 2 Pin compatible radio connection cable for Peltor® / 3M® CH-3 series. This Kenwood® 2 Pin compatible radio connection cable is specifically designed for Peltor® / 3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x radio FLX2-36 Kenwood® 2 pin compatible connection cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.
FLX2-69 Motorola DP compatible radio connection cable for Peltor® / 3M® CH-3 series
Motorola DP compatible radio connection FLX2-69 cable for Peltor® / 3M® CH-3 series. This Motorola DP compatible FLX2-69 radio connection cable is specifically designed for Peltor®/3M® headsets of the CH-3 series with the end number xxxxxx-111 in the product designation.The CH3 headset series from 3M® / Peltor® is available in a variety of versions. The manufacturer specific designation, e.g. MT74H52P3E-111, describes not only the design (such as headband or helmet attachment) but also important electrical properties that are decisive for the selection of the appropriate radio connection cable.The last three key figures of the product designation are decisive here:xxxxxxxx-110: The ‘110’ indicates a dual com headset with a dynamic boom microphone.xxxxxxxx-111: The ‘111’ indicates a dual com headset with a dynamic boom microphone and integrated Push-to-Talk (PTT) button.The FLX2-69 cable offered here is only compatible with 3M® / Peltor® CH-3 headsets with the end identifier xxxxxxxx-111, i.e., with headsets that have an integrated Push-to-Talk (PTT) button on the back.Special features of the Starcom1 FLX2-69 connection cable:Available with various radiospecific connection plugs.Coiled body with high restoring force.PUR cable quality.6-pin mini XLR plug, compatible with 3M® / Peltor® CH-3 with the type designation xxxxx-111.Untensioned cable length approx. 65 cm.Special lengths available on request.If you are unsure about the design, please contact us.Scope of delivery:1 x radio specific connection FLX2-69 cable for Peltor® / 3M® headsets of the CH-3 series with the end identifier ‘111’.