Racing headsets and accessories for professional motorsport
In professional motorsport in Europe, two connection standards for racing headsets and accessories are common. The Peltor and Stilo systems are used in approximately 90% of applications.
FMT120 / SH-006 built-in headset for jet/system helmets
The Peltor® FMT120 compatible SH-006 DP headset is designed for jet and system helmets. The StarCom1 FMT120 headsets are compatible with Peltor® FMT120 intercom systems. The focus is on the overall quality of workmanship, comparable to the original Swedish products.The headsets are fitted with waterproof Nexus/Amphenol connectors. The connectors are overmoulded with a rubber-like two-component material, providing a highly non-slip surface and ensuring secure connection even with slippery fingers. Manufacturing of the cable sets and headsets takes place at the company's headquarters in Aurich, allowing for direct quality control and the fulfillment of special requests. The plugs are of particularly high quality. If you are unsure whether this product is suitable for your needs, please contact us. We are happy to assist.Package contents:1 x coiled cable with FMT120 compatible 4-pin Nexus jack plug1 x built-in headset with two flat speakers and a boom microphone for system/jet helmets.
3M® / Peltor® Rally headset MT7H79A-78
Rarity - 3M® / Peltor® Rally Headset MT7H79A-78 in Racing White StarCom1 is offering a classic 3M® / Peltor® Rally Headset MT7H79A-78 in nostalgic racing white. This headset is very rare as its production by 3M/Peltor was discontinued many years ago. This color/design was a widespread headset in the 80s/90s and was predominantly used in historical motorsport.Condition: The headset is in perfect technical and optical condition – it may possibly have never been used.Warranty and VAT: This item is subject to differential taxation according to § 25a of the German VAT Act (UStG); therefore, VAT will not be shown on the invoice. The legal warranty period is 12 months.Scope of Delivery: 1 piece of 3M® / Peltor® Rally Headset MT7H79A-78 in Racing White
3M® / Peltor® rally splitter cable MT 0,3+0,4-2 m (FL4A) in collector condition
Offered here is a classic 3M® / Peltor® Rally splittern cable MT 0,3+0,4-2 m (FL4A) in excellent collector condition. The cable is clean, exhibits only slight signs of use, and has been chemically cleaned to ensure it is free of adhesions, dirt, and odors. Please note:This item is subject to differential taxation according to § 25a UStG. Therefore, VAT is not shown on the invoice. The statutory warranty period is 12 months. Included in delivery:One used (not new) 3M® / Peltor® Rally splitter cable MT 0,3+0,4-2 m (FL4A) , without packaging and instructions.
3M®/Peltor® rally extension cable MT 0.7-4m (FL3B) in collector condition
Offered here is a classic 3M®/Peltor® Rally extension cable MT 0.7-4m (FL3B) in excellent collector condition. The cable is clean, exhibits only slight signs of use, and has been chemically cleaned to ensure it is free of adhesions, dirt, and odors.Please note: This item is subject to differential taxation according to § 25a UStG. Therefore, VAT is not shown on the invoice. The statutory warranty period is 12 months.Included in delivery: One used (not new) 3M®/Peltor® Rally extension cable MT 0.7-4m (FL3B), without packaging and instructions.
Peltor® compatible SH-004 dynamic / cinch headset
Peltor® compatible helmet harness with dynamic adhesive microphone for racing helmets and chich connection The StarCom1 helmet harness is designed for users seeking a temporary headset solution. It features a coiled lead with a Peltor® compatible 4-pin jack, a dynamic noise canceling microphone capsule, and an chich connector for in-ear audio components.The helmet harness securely attaches to the helmet's exterior using high-adhesion 3M® adhesive tape. The dynamic 300 ohm microphone includes wind/pop protection and a rear adhesive / hook and loop fastener. The approximately 25 cm lead incorporates a central break point for simplified integration into helmet padding.Note: An in-ear headset with an chich plug is required for operation and is not includedScope of delivery:1 Helmet harness assembly with coiled lead, dynamic adhesive microphone, and chich audio connector
Peltor® compatible SH-004 dynamic / Lemo® headset
Peltor® compatible helmet harness with dynamic adhesive microphone for racing helmets and Lemo® connection The StarCom1 helmet harness is designed for users seeking a temporary headset solution. It features a coiled lead with a Peltor® compatible 4-pin jack, a dynamic noise canceling microphone capsule, and an Lemo® connector for in-ear audio components.The helmet harness securely attaches to the helmet's exterior using high-adhesion 3M® adhesive tape. The dynamic 300 ohm microphone includes wind/pop protection and a rear adhesive / hook and loop fastener. The approximately 25 cm lead incorporates a central break point for simplified integration into helmet padding.Note: An in-ear headset with an Lemo® plug is required for operation and is not includedScope of delivery:1 Helmet harness assembly with coiled lead, dynamic adhesive microphone, and Lemo® audio connector
Racing helmet audio system for Stilo® helmets - Made in Germany
Racing helmet audio system for Stilo helmets - Made in Germany by StarCom1 This high quality audio retrofit system is designed for Stilo® helmets with a side accessory opening.It includes a built-in socket for 7.11 mm Stilo® / Peltor® / Amphenol® jack plugs, racing loudspeakers, and a dynamic noise cancelling adhesive microphone. The flexible, plug and play cable connection allows for easy headset installation without soldering or specialized tools.If you need assistance selecting the right components and microphone technology, please contact us.Scope of Delivery:1 installation socket with rear cable harness2 flat-design racing speakers, including supply cables and installation pads1 dynamic adhesive microphone
Racing/ rally training headset Peltor® compatible
Racing / rally training headset Peltor® compatible - StarCom1 X3A training headset (Peltor® compatible) The StarCom1 X3A training headset offers professional grade communication for racing and rally environments. This is a newly developed, noise isolating headset specifically designed for users with Peltor®-compatible intercom systems.This headset utilizes globally available Peltor® X-series hearing protection capsules, which Uwe Evers GmbH has modified with electrical components to create a racing/rally training headset.The StarCom1 X3A racing headset features a rigid microphone boom with a noise-cancelling microphone, making it ideal for noisy environments.The durable, Kevlar reinforced PUR spiral cable provides excellent retraction and features a Peltor® / Nexus® compatible 7.11 mm jack plug.The training headset is available in various configurations, including:Coloured headbandsLeft or right-side microphone cable installationElectric or dynamic microphone technologyCustomizable plug configurations for Peltor®, Stilo®, OMP®, Terratripp®, Sparco®, etc.
Stilo® Wireless Intercom WL-10 Key Audio Headset - Racing Helmet - Audio System by StarCom1
Stilo® Wireless WL-10 Key Audio Headset for Racing Helmets, compatible with the Intercom WL-10 system from StarCom1. This professional audio headset is engineered for users demanding a reliable and powerful communication system with the Stilo® Wireless Intercom WL-10. It provides a flexible, robust solution to retrofit full-face helmets with the Stilo Wireless Key System.Key Features:High flexibility, high resilience twisted PUR supply cable.Secure connection via overmoulded female coupling plug for the Stilo Wireless Key.Crystal clear voice transmission with dynamic differential microphone.Stilo compatible Lemo in-ear connection.Durable In-Ear headset with high strength, twisted outgoing cable and Lemo plug.Not sure which components and microphone technology suit your needs?Contact us for expert advice!What's Included:1 helmet main wiring harness1 dynamic adhesive microphone1 racing in-ear headset with Lemo plug
Terratrip® Clubman compatible TC-004 ful face helmet headset
Terratrip® Clubman compatible TC-004 full-face helmet intercom headset This helmet mounted headset with a 6.30mm jack plug is compatible exclusively with Terratrip® / Terraphone Clubman intercom systems. The jack plug is overmolded with a rubber like plastic, ensuring a secure and waterproof connection.Included in delivery:1 x TC-004 built-in headset for full face helmets, equipped with an adhesive microphone and a Terratrip/Terraphone compatible 6.30mm jack plug.
Terratrip® Clubman compatible TC-006 open face helmet headset
Terratrip® Clubman compatible TC-006 open face helmet headset This helmet mounted headset with 6.30 mm jack plug is only compatible with Terratrip® / Terraphone Clubman intercom systems. The jack plug is moulded with a rubber like plastic that ensures a secure and waterproof hold.Scope of delivery:1 x built-in headset for jet/system helmets with gooseneck microphone and Terratrip® / Terraphone compatible 6.30 mm jack plug.