-
Aviation
- LIFT Aviation® - Bose® & Lightspeed®
- HeliTalk BPG-Radio Service & Repair
- Rega® II Repair
- Helicopter / radio headset
- Headset Helitack Ground Support
- Ground Mechanic & Pushback Headsets
- Aviation Headset Repair
- Sennheiser®
- David Clark®
- Zulu lightspeed®
- Hang Gliding
- Paragliding radio
- Gyrocopter
- Paramotor
- F.U.N.K.E cable sets
- Aircraft radio
- Cable / Plug / Aviation
- MicroAvionics®
- Marine
- Military
- Police / Fire and Rescue
- Industry
- Forestry / Horticulture
- Motorbike
- Racing
- Fox cable
- Sport shooters
- Tour guide systems
Cables, Plugs, Sockets, and Couplings in General Aviation
A key component of electrical connections in general aviation involves axially latching plug and coupling combinations. In addition to these, a wide variety of manufacturer-specific plug connections exist.
A common standard is the so called PJ standard. The PJ-055 standard defines a plug with a diameter of 6.30 mm, utilized for the transmission of audio signals to the headphones. For the transmission of microphone signals, a plug with a diameter of 5.23 mm is employed, conforming to the PJ-068 plug standard.
7.1 mm 5-Pin TP-105 Nexus® Plug
Nexus® TP-105 7.1 mm 5-Pin Jack Plug The Nexus® / Amphenol® TP-105 plugs, also known as Nexus/Amphenol Type U384/U, are 5-pin jack plugs. The plug contact surfaces feature a nickel-beryllium coating and are used, for example, to connect headsets and radio devices.Special Features:5-pin, for 7.11 mm jack plugsNickel-beryllium contact surfaceExtremely durable
Airband Radio PJ-055 Female Connector (Jack) (Speaker)
Airband Radio PJ-055 Female Connector (Jack) for PJ-055 Plug (Speaker) The PJ-055 female connector (jack) is the counterpart to the PJ-055 jack plug (male) with a 6.30 mm outer diameter in stereo configuration (3 contacts). In aviation, this standard plug is also referred to as a "GA" (General Aviation) plug for speakers.Special Features:PJ-055 female connector (jack)Compatible with PJ-055 jack plug (male)6.30 mm outer diameterStereo contacts (3 contacts)GA standard (General Aviation)
Airband Radio PJ-055 Jack Plug (Speaker)
PJ-055 General Aviation Speaker Jack Plug 6.30 mm This high quality full metal jack plug (PJ-055) of industrial quality is used for connecting speakers to intercoms/airband radios (General Aviation). The plug has a diameter of 6.30 mm.
Airband Radio PJ-055 Panel Mount Jack (Speaker)
Airband Radio PJ-055 Panel Jack for PJ-055 Plug (Speaker) The PJ-055 panel mount jack (female) is the counterpart to the PJ-055 jack plug (male) with a 6.30 mm outer diameter in stereo configuration (3 contacts). In aviation, this standard plug is also referred to as a "GA" (General Aviation) plug for speakers.Special Features:PJ-055 panel mount jack (female)Plastic housing - for insulated installationCompatible with PJ-055 jack plugs (male)6.30 mm inner diameterStereo contacts (3 contacts)GA standard (General Aviation)
Airband Radio PJ-055 Panel Mount Jack (Speaker) - Metal Version
Airband Radio PJ-055 Panel Mount Jack, Heavy Metal Version (Speaker)High-quality 6.30 mm General Aviation speaker panel mount jack in a full-metal, industrial-grade version.Special Features:Airband Radio GA PJ-055 panel mount jack (audio output - listen)Heavy metal design for 6.30 mm jack plugsFull-metal, industrial-grade version
Airband Radio PJ-068 Chassis Mount Jack, Metal Version (Microphone)
Airband Radio PJ-068 Chassis Mount Jack, Heavy-Duty Metal Version (Microphone)High-quality 5.23 mm General Aviation microphone chassis mount jack in a full-metal, industrial-grade design.Special Features:PJ-068 chassis mount jack for GA airband radio (audio input - talk)For 5.23 mm jack plugsFull-metal, industrial-grade design
Airband Radio PJ-068 Panel Mount Jack (Microphone)
Airband Radio PJ-068 Panel Jack for PJ-068 Plug (Microphone) The PJ-068 panel mount jack (female) is the counterpart to the PJ-068 jack plug (male) with a 5.23 mm outer diameter in stereo configuration (3 contacts). In aviation, this standard plug is also referred to as a "GA" (General Aviation) plug for microphones.Special Features:PJ-068 panel mount jack (female)Plastic housing - for isolated installationCompatible with PJ-068 jack plugs (male)5.23 mm inner diameterStereo contacts (3 contacts)GA standard (General Aviation)
Aircraft radio PJ-068 coupling socket (microphone)
Aircraft radio PJ-068 coupling socket for PJ-068 jack plug (microphone) The PJ-068 female coupling socket is designed to mate with the PJ-068 male jack plug, which has an outer diameter of 5.23 [mm] and utilizes stereo contacting (3 contacts). This standard plug is commonly referred to in aviation as a 'GA' (General Aviation) microphone plug.Special features:PJ-068 coupling socketCompatible with PJ-068 jack plug5.23 [mm] outer diameterStereo contacting (3 contacts)GA standard (General Aviation)
Cable with PJ-055 Jack Socket
Pre-assembled Cable with PJ-055 Jack Socket Pre assembled cable with a molded PJ-055 jack socket, 6.30 mm (speaker). Special lengths and forms available upon request.Special Features:Cable diameter: approx. 4.60 mmSuitable for General Aviation PJ-055 (6.30 mm) plugsShielded cable construction, minimizes interferenceLength: approx. 200 cm
Cable with PJ-068 Female Connector (Jack)
Pre-assembled Cable with PJ-068 Female Connector (Jack) Pre assembled cable with molded PJ-068 female connector (jack), 5.23 mm (microphone). Special lengths and shapes available upon request.Special Features:Cable diameter: approx. 4.60 mmSuitable for General Aviation PJ-068 connectors (5.23 mm)Shielded cable construction, minimizes interferenceLength: approx. 200 cm
General Aviation Airband Radio PJ-068 Jack Plug (Microphone)
PJ-068 General Aviation Microphone Jack Plug 5.23 mm.This high-quality full-metal jack plug (PJ-068) of industrial quality is used for connecting microphones to intercoms/airband radios (General Aviation). The plug has a diameter of 5.23 mm
General Aviation Headset Cable
General Aviation Headset Cable – OEM Quality with Robust Military Standard Plugs.This headset replacement cable complies with the GA aviation standard and features PJ-055 and PJ-068 General Aviation plugs. All 5 pins are wired and can be contacted at the cable end. The microphone lead from the PJ-068 plug is shielded. The overmolded jack plugs, made from corrosion-resistant copper-tin alloy, are robust and meet common military standards.The basic cable material consists of robust and acid-resistant PUR with internal Kevlar reinforcement and a diameter of 4.6 mm. The straight cable section from the plug housing to the Y-split is approximately 20 cm long and transitions into a coiled cable with an approx. 50 cm block length. The unstretched cable length is approximately 95 cm and can be extended to approx. 220 cm.The coiled body features a special Helix coil that ensures high restorative force.Special Features:PJ-055 and PJ-068 General Aviation plugs, compatible with common GA headsets.Full pinout: all 5 pins are wired and contactable.Shielded cable design: minimizes interference for clear voice transmission.Overmolded jack plugs and cable splitter.Corrosion-resistant copper-tin alloy plugs for long lifespan.Complies with common military standards for robustness.Helix coil with high restorative force: ensures lasting flexibility and shape retention.Straight cable section (approx. 20 cm) to the Y-split.Coiled cable with approx. 50 cm block length.Unstretched length: approx. 95 cm.Extendable length: approx. 220 cm.
Lemo® 6 Pin Plug - Compatible with Bose® A20 / A30
Connection Cable for 6-Pin LEMO® Systems (Bose® A20 / A30 Compatible)This special connection cable by StarCom1 allows you to seamlessly connect standard GA headsets to 6-pin LEMO® systems.This adapter solution is primarily designed for the Bose® A20 / A30 series, as well as identically constructed models that feature a 6-pin LEMO® plug/socket.With a standard length of 180 cm, the cable provides sufficient reach for flexible applications. Upon request, special lengths or coiled versions are also available to meet your individual needs.Feel free to contact us for more information or special requirements!Scope of Delivery:1 piece connection cable with 6-pin LEMO® plug, compatible with Bose® A20 / A30, outer diameter: 4.60 mm, length: 180 cm
Nexus TJ-101 4-Pole Coupling Socket - Peltor Compatible
7.1 [mm] 4-Pole Coupling Peltor Nexus TJ-101 This Peltor-compatible coupling, also known as Nexus/Amphenol TJ-101, is suitable for 4-pole male connectors (Peltor connectors) TP-120, TP-101, TPSJ-101, and TP-102. The coupling features a beryllium copper contact surface and is used, for example, for connecting headsets and radios. Special features: Peltor compatible4pole,for 7.11 mm male connectorsBeryllium copper contact surfaceVery robust
Nexus TJ-105 7.1 [mm] 5-Pole Female Connector
7.1 mm 5-pole Socket Peltor Nexus TJ-105 This socket, also known as Nexus/Amphenol TJ-105, is compatible with 5-pole male connectors of the TP-105 series. The socket features a beryllium-copper contact surface and is used, for example, for connecting headsets and radios. Special Features: 5-pole compatible, for 7.11 mm male connectorsBeryllium-copper contact surfaceVery robust
Nexus® TJS-102 4-Pin Socket with PTT Button
Nexus® TJS-102 - 4-Pin Socket with Integrated PTT Button This socket with an integrated PTT button is also known as U-94A/U. It's compatible with 4-pole male TJ-102 connectors.Key Features:Durable contacts: The beryllium/copper contact surfaces ensure a reliable, long-lasting connection.Waterproof button: The integrated push-button is waterproof for optimal performance in all conditions.
Nexus® TJS-105 5-Pin Coupling with PTT Button
Nexus® TJS-105 5-Pin Coupling with Integrated PTT Button Assembly consisting of a Nexus® TJS-105 coupling with an integrated PTT button. It fits 5-pin jack plugs of the TJ-105 type. The coupling/PTT combination features beryllium copper contact surfaces and a waterproof button.Special Features:Nexus® TJS-105 couplingIntegrated PTT button function5-pin TJ-105 compatibilityBeryllium copper contact surfacesWaterproof button
TJT102-EU 7.1 mm Compatible Metal Chassis Mount Jack
TJT102-EU Compatible Metal Chassis Mount JackThe 7.1 mm TJT102-EU chassis mount jack with a robust CuZn housing is suitable for Peltor® / Nexus® / Amphenol® 7.1 mm 4-pin jack plugs. It's a professional StarCom1 chassis mount jack, developed for particularly harsh operating conditions.The housing of the chassis mount jack is made of a high-strength CuZn alloy. Thanks to the spring-loaded cap, the chassis mount jack is effectively protected against dust and moisture when not in use.IMPORTANT NOTE:This item is not a product of the brands Peltor®, Nexus®, or Amphenol®. The chassis mount jack is an item from Uwe Evers GmbH and a compatible alternative product to the original Peltor® Nexus® TJT102 EU.