Autocom intercoms
Autocom 7-pin installation socket for intercom systems
Autocom 7-pin installation socket for intercom systems The EBA-03-01 mount socket is a waterproof socket with a protective cap that enables a fixed plug connection to the vehicle. The housing of the integrated socket is made of overmolded plastic with strain relief and kink protection on the rear.The connection cable is approximately 60cm in length. Special lengths are available on request. An 18mm diameter hole and 45mm installation depth are required for installation.Scope of delivery: 1 x Installation socket with waterproof protective cap, Autocom compatible, 7-pin, cable length approximately 60cm
Autocom part 2113 a type-32 helmet headset installation kit
Autocom Part 2113 a Type-32 helmet headset installation kit The Autocom 2113 a Type-32 headset is specifically designed for Autocom Easi-Rider (Kit-150) and Active-Rider (Kit-200) systems. Main features:Compatibility: Fully compatible with the Autocom 7-pin connector.Secure connection: The overmoulded 7-pin connector made of rubber like plastic locks securely and waterproof into the Autocom hitch connector.Usage: Designed for Autocom intercom systems without ANS, supporting both driver and passenger communication.Compatibility to Autocom intercom systems:Autocom Easy-Rider Kit 150 (driver and passenger)Autocom Active-Rider Kit 200 (driver and passenger) Autocom Pro AVi Kit 300 (passenger ONLY) Autocom Super Pro Automatic Basis (passenger ONLY)Note: System Compatibility: Not compatible with Logic systems (these require 8 Ohm Type-8 headsets).Scope of delivery:1 x Autocom Part 2113-a installation headset with Autocom 7-pin plug
Autocom Type-32 Part 2110a with ANS Sensor Headset Installation Kit
Autocom Type-32 Part 2110a with ANS Sensor Headset Installation KitThe Autocom Type-32 Part 2110a ANS headset is specifically designed for Autocom intercom systems of the AVI Pro series, e.g., Super Pro, SP-A or SP-C, which means all systems with an ANR function.Main features:Compatibility: Fully compatible with the Autocom 7-pin connector.Secure connection: The overmoulded 7-pin connector made of rubber like plastic locks securely and waterproof into the Autocom hitch connector.Usage: Suitable for Autocom intercom systems with an ANS function as a rider headset.Compatibility to Autocom intercom systems: Autocom Pro AVi Kit 300 (rider ONLY) Autocom Super Pro Automatic Basis (rider ONLY) Note: System Compatibility: Not compatible with Logic systems (these require 8 Ohm Type-8 headsets). Scope of delivery: 1 x installation headset for rider helmet, Part 2110 A, Type 32, with ANS-sensor
Dual isolated audio adapter cable for navigation systems
Dual isolated audio adapter cable for navigation systems This audio cable enables duplex audio transmission between Garmin Zumo 550/660 navigation systems and downstream intercom systems.Telephone calls, navigation prompts, and MP3 audio are transmitted in mono. The duplex audio transmission facilitates both navigation prompts and Bluetooth telephone functionality. One channel transmits audio from navigation prompts and incoming calls to the intercom, while the second channel transmits microphone audio from the intercom to the navigation device, enabling two-way communication. TThe cable's total length is approximately 180 cm. Depending on the intercom system used, different connectors and configurations may be required.Note: Mono transmission is utilized as stereo output is not required for navigation prompts or telephone calls.Scope of delivery: 1 x Dual isolated adapter cable
PMR446 radio connection cable kit for Autocom Type-32 headsets.
Autocom Type-32 headset radio cable kit for PMR446 radios.This cable kit facilitates direct connectivity between PMR446 radios and Autocom Type-32 helmet headsets (and compatible models), eliminating the requirement for an external Autocom intercom system. Ideal for driving instruction environments. Scope of delivery:1 x Radio connection cable with radio connector1 x PTT (Push-to-Talk) button
Radio connection cable with PTT button for Autocom intercom systems
Autocom radio cable set with integrated PTT button This radio / PTT connection cable facilitates seamless radio device integration into Autocom intercom systems within vehicle installation environments. The cable harness features a radio specific connector plug, a plug in PTT button, and a 5-pin DIN plug, compatible with the grey Autocom universal interface. Additional adapters are not required.Scope of delivery:1 x Radio wiring harness in Y-configuration 1 x PTT button