Used Peltor® LiteCom® headsets, quality refurbished
3M® / Peltor® Headset (MT7H79P3E) - Helmet Adapter
Refurbished 3M® / Peltor® Standard Headset with Helmet Clamp AttachmentAs part of a complete overhaul carried out by Uwe Evers GmbH, the headset was disassembled into its individual components, cleaned, and reassembled.Description: As part of the overhaul, the headset was fully disassembled, cleaned, and reassembled. All technical faults were rectified. The headset, cable, and microphone were chemically washed and cleaned, and are free from residue, contamination, and odors.Condition: The headset is in perfect technical condition and good used condition.Warranty and VAT: This item is subject to margin taxation according to § 25a of the German VAT Act (UStG), meaning VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Important Note: The designations Peltor® and 3M® are registered trademarks. The refurbishment offered here is not affiliated with the trademark owners and is an offer from Uwe Evers GmbH.Scope of Delivery: 1 piece of 3M® / Peltor® standard headset with helmet clamp attachment MT7H79P3E, black color, dynamic microphone, and Nexus TP-120 connector with NATO or Peltor wiring (choice available).
3M® / Peltor® LiteCom® Basic MT753H7A4400 (used)
3M® / Peltor® LiteCom® Basic MT753H7A4400 (used)Uwe Evers GmbH offers a used 3M® / Peltor® LiteCom® Basic headset (MT53H7A4400).The headset (headband version) is visually unused and in very good condition.This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice.The statutory warranty is 12 months.Note:A variant with helmet mount attachment is available upon request.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Basic headset (MT53H7A4400, headband version)
3M® / Peltor® LiteCom® Plus (MT73H7A4410WS-EU) 16 Channels / Bluetooth (Used)
Used 3M® / Peltor® LiteCom® Plus Headset (MT73H7A4410WS-EU) (16 Channels / Bluetooth®)The 3M® / Peltor® LiteCom® Plus offered here is one of the current models from approx. 2023, featuring 16 PMR446 channels and Bluetooth®.The headset is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to § 25a UStG of German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT73H7A4410WS-EU), with battery, charger, and charging cable. Without manual/accompanying documents or original packaging.
3M® / Peltor® LiteCom® Plus MT537H7A4410WS5 (used)
A used 3M® / Peltor® LiteCom® Plus Headset (MT537H7A4410WS5) with Bluetooth is offered. The headset (headband version) is almost unused and in very good condition. This article is subject to differential taxation (margin scheme) according to § 25a UStG (German VAT Act). Therefore, VAT will not be shown on the invoice. The statutory warranty is 12 months. Scope of delivery: 1 x 3M® / Peltor® LiteCom® Plus Headset MT537H7A4410WS5, headband version).
3M® / Peltor® LiteCom® Plus MT7H7P3E4410-EU (Used)
Offered here is a used 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU).The headset (helmet attachment version) is virtually unused and in very good condition.This item is subject to margin scheme taxation (Differenzbesteuerung according to German tax law). Therefore, VAT will not be shown separately on the invoice. The statutory warranty period is 12 months.Note:A headband version is available upon request.Please note:The battery shown in the illustration is not included in the delivery. Please check the scope of delivery!Important notice:3M® and Peltor® are registered trademarks. The product offered here is used and is not distributed by the trademark owners. The statutory warranty for this item is provided by Uwe Evers GmbH.Scope of Delivery:1 x 3M® / Peltor® LiteCom® Plus headset (MT7H7P3E4410-EU, helmet mount), without battery and charger.
Cable with angled U-173/U and MP-101 microphone plugs
Cable with angled U-173/U and MP-101 microphone plugs Connection cable made of PUR (2.8 mm), kevlar reinforced, with molded MP-101 and U-173/U microphone plugs.
Finger PTT button, compatible with Peltor® LiteCom®
Finger PTT button, compatible with Peltor® LiteCom® This StarCom1 finger PTT button allows you to operate the radio module of the Peltor® LiteCom® system either via the integrated PTT button on the earcup or via this separate external finger PTT button. Both buttons can be used simultaneously. The external finger PTT button is especially useful when your hands are dirty or when you must wear work gloves, as it can be easily placed inside the glove. Scope of delivery:1 x Peltor® compatible finger PTT button (length approx. 70 cm).
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)
FL6BR - Peltor® LiteCom compatible cable (Nexus TP-120)The FL6BR connection cable, featuring a 7.11 mm jack plug, is a product of Uwe Evers GmbH. It connects systems with a Nexus coupling socket or PTT buttons (such as the Peltor® FL56xx adapter or similar devices) to Peltor® LiteCom headsets with a 4-pin audio interface.This cable is pin compatible with the original Peltor FL6BR cable equipped with a J11 connector.Please inquire for different length requirements.Scope of Delivery:1 x Peltor® FL6BR compatible, smooth cable with a 7.11 mm jack plug (TP-120 Nexus® / Peltor® compatible), approximately 70 cm in length.
FL6BR Spiral Peltor® LiteCom® kompatibles Kabel (Nexus® TP-120)
FL6BR Spiral Cable, compatible with Peltor® LiteCom® (Nexus® TP-120)The FL6BR connection cable with a 7.11 mm TP-120 compatible jack plug is a product of Uwe Evers GmbH. It adapts systems with a Nexus® coupling socket / PTT buttons, such as the Peltor® FL5000 adapter, to Peltor® LiteCom® headsets with a 4-pin audio interface.The cable is pin compatible with the original Peltor® FL6BR cable with a J11 plug. If you require a different length, please inquire.Scope of Delivery:1 Peltor® FL6BR compatible spiral cable with a TP-120 Nexus® / Peltor® compatible 7.11 mm jack plug. Length approx. 70 cm.The Peltor® LiteCom® headset and the Peltor® FL-56xx / SEM®52 SL PTT button are NOT included in the scope of delivery.
FL6BS / audio mono - Peltor® LiteCom® compatible cable
FL6BS / audio mono - Peltor® LiteCom® compatible cable This cable, a product of Uwe Evers GmbH, connects handheld microphones (e.g., with loudspeaker output) featuring a 2.5 mm mono jack plug socket to Peltor® LiteCom headsets with a 4 pin audio interface. The cable is pin compatible with the original Peltor® FL6BT cable. For different length requirements or a coiled version, please contact us. Scope of delivery:1 x Peltor® FL6BS compatible cable with special plug and 2.5 mm mono jack plug, approximately 70 cm in length.
FL6BT / audio mono - Peltor® LiteCom® compatible cable
FL6BT / audio mono - Peltor® LiteCom® compatible cable This cable, a product of Uwe Evers GmbH, connects handheld microphones (e.g., with loudspeaker output) featuring a 3.5 mm mono jack plug socket to Peltor® LiteCom® headsets with a 4 pin audio interface. The cable is pin compatible with the original Peltor® FL6BT cable. For different length requirements or a coiled version, please contact us. Scope of delivery:1 x Peltor® FL6BT compatible cable with special plug and 3.5 mm mono jack plug, approximately 70 cm in length.
FL6CT / MP-3 - Peltor® LiteCom compatible cable
FL6CT / MP-3 - Peltor® LiteCom compatible cable The FL6CT connection cable, featuring a 3.5 mm stereo jack plug, is a product of Uwe Evers GmbH. It allows the connection of audio MP3 stereo systems with a 3.5 mm stereo jack plug to Peltor® LiteCom headsets equipped with a 4-pin audio interface. This cable is pin compatible with the original Peltor® FL6CT cable.For different length requirements or a spiralised version, please contact us.Scope of Delivery:1 x Peltor® FL6CT compatible cable with special plug and 3.5 mm stereo jack plug, approximately 70 cm in length.
FL6CT-4 - Peltor® LiteCom compatible iPhone / Android cable
FL6CT-4 - Peltor® LiteCom® compatible iPhone / Android cable The FL6CT-4 connection cable, featuring a 3.5 mm 4 pin jack plug for iPhone or Android, is a product from Uwe Evers GmbH. It facilitates the connection of iPhone or Android smartphones with a 3.5 mm jack socket to Peltor LiteCom headsets.This cable allows for the connection of an additional phone when the Bluetooth interface is in use. For different length requirements, angled plugs, or a coiled version, please contact us.Scope of Delivery:1 x Peltor® compatible cable with 3.5 mm 4 pin jack plug for iOS / Android. Length approximately 70 cm.
Peltor® compatible flex cable FL6U-21 for Motorola 2-pin GP300 / CP040
Peltor® compatible flex cable FL6U-21 for Motorola® 2-pin GP300 / CP040 The FL6U-21 flex cable by Uwe Evers GmbH is compatible with Peltor® intercom systems and hearing protection headsets, enabling their use with Motorola® GP300, CP040, and similar radios equipped with a 2.5/3.5 mm double socket.This cable is pin compatible with the original Peltor® FL6U-21 cable.Scope of delivery:1 x spiral cable with Peltor® Audio compatible special plug and 2.5/3.5 mm Motorola GP double plug.
Peltor® LiteCom® Basic PMR446 / Pre-Owned / Refurbished
Used 3M® / Peltor® LiteCom® Basic Headset (MT53H7A4400, Headband Version) with Minor Signs of Wear. Note: A helmet-mount variant is available upon request. This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice. The statutory warranty is 12 months. As part of a complete overhaul conducted by Uwe Evers GmbH, the headset (MT53H7A4400) was disassembled into its individual sub-assemblies, cleaned, and reassembled. All technical sources of failure have been eliminated. Earcup housings, cables, and the microphone have been chemically cleaned and are completely free from deposits, dirt, and odors. The headset is in good used condition and in perfect working order. Scope of Delivery:1 x Used Peltor® LiteCom® Basic headset, without original packaging, manual, or batteries.
Refurbished Peltor® LiteCom® Basic Headset - Used
Used and Refurbished Peltor® LiteCom® Basic MT53H7P3E4400-EU Peltor® MT53H7P3E4400-EU with helmet adapter. Completely washed and disinfected by Uwe Evers GmbH, free from deposits or odors.Please refer to the detailed close-up photos.This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice. The statutory warranty is 12 months. As part of a full overhaul, the headset (MT53H7A4400) was disassembled into its individual sub-assemblies, cleaned, and reassembled. All technical sources of failure have been rectified by Uwe Evers GmbH. The earcup housings, cables, and microphone have been chemically cleaned and are completely free from deposits, dirt, and odors. The headset is in good used condition and in perfect working order.Scope of Delivery: 1 x Used Peltor® LiteCom® Basic with helmet adapter, without original packaging, manual, or batteries.
Refurbished Peltor® LiteCom® Basic Headset with Pfanner® Helmet Attachment
Used and Refurbished Peltor® LiteCom® Basic MT53H7P3E4400-EU with Pfanner® Helmet Attachment Peltor® MT53H7P3E4400-EU with Pfanner® radio bracket / helmet adapter. This variant can be attached directly to Pfanner® Protos® helmets. Completely washed and disinfected, equipped with a new overhead cable, and free from deposits or odors.Please refer to the detailed close-up photos. This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice.The statutory warranty is 12 months. As part of a full overhaul, the headset (MT53H7A4400) was disassembled into its individual sub-assemblies, cleaned, and reassembled. All technical sources of failure have been rectified by Uwe Evers GmbH. The earcup housings, cables, and microphone have been chemically cleaned and are completely free from deposits, dirt, and odors. The headset is in good used condition and in perfect working order.Scope of Delivery:1 x Used Peltor® LiteCom® Basic with Pfanner® helmet adapter, without original packaging, manual, or batteries.
Refurbished Peltor® WS Bluetooth Headset (MT53H7AW2S)
Used Peltor® WS Bluetooth Headset (MT53H7AW2S, Headband)This headset enables a Bluetooth connection with a smartphone and call answering via a button on the back. It is in flawless technical condition, fully refurbished, with minor visible signs of wear.Completely refurbished by Uwe Evers GmbH: cleaned, disinfected, equipped with a new overhead cable, and free from residue or odors.Please refer to the detailed close-up photos.This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice. The statutory warranty is 12 months.As part of a full overhaul, the headset was disassembled into its individual components, cleaned, and reassembled. All technical sources of failure have been resolved.Earcup housings, cables, and the microphone have been chemically cleaned and are completely free from deposits, dirt, and odors.The headset is in good used condition and in perfect working order.Scope of Delivery:1 x Used Peltor® WS Bluetooth headset (MT53H7AW2S, headband), without original packaging, manual, or set of AA batteries.
Repair / Replacement Service for Peltor® MT-53 Microphones
Repair / Replacement Service for Peltor® MT-53 MicrophonesReplacement service for MT-53 microphones provided by Uwe Evers GmbH.You send us your defective or soiled MT-53 microphone and receive a fully refurbished and cleaned MT-53 microphone in exchange.As part of the cleaning process, the MT-53 microphone is completely disassembled, chemically cleaned, and reassembled.The internal electrical microphone capsule is replaced with a brand-new one.Following the overhaul, the microphone is completely free of residues, contaminants, and odors.Scope of Delivery:1 x Refurbished Peltor® MT-53 electret microphone in exchange (Please note: This is an exchange service; you will not receive a new item).Microphone refurbishment typically takes 4–5 business days after order approval by our accounting department.After placing your order online, we will contact you with the shipping address where you can send your microphones.Please also check our LiteCom® overhaul service, where we offer general servicing for LiteCom® headsets. Feel free to contact us for further details.
Smartphone adapter for 3M® / Peltor® LiteCom hearing protection systems
Smartphone adapter for 3M® / Peltor® LiteCom hearing protection systems iOS/ Android adapter with a call acceptance button from StarCom1 for connecting an additional smartphone to a Peltor® LiteCom hearing protection system.The smartphone adapter cable supports iPhone and Android operating systems.Scope of Delivery:1 x Peltor® LiteCom compatible smartphone adapter with a 4 pin jack plug connection
Technical revision / cleaning / washing of Peltor® / 3M® LiteCom headsets
Technical overhaul and cleaning service for Peltor® / 3M® LiteCom headsets. We provide a comprehensive overhaul and cleaning service for Peltor® / 3M® LiteCom communication headsets.Headsets are completely disassembled, and all non electronic components are machine-washed. They are then dried, disinfected, polished, and reassembled. Additional repairs and services are available upon request.General Information: The EN352 approval remains valid after repair by Uwe Evers GmbH.The overhaul / cleaning service usually takes 4-5 working days after order approval by our accounting department.Once the order has been placed online, we will contact you and inform you of the delivery address to which you can send your headsets.Scope of Services: Headset overhaul, cleaning, and disinfection
Used Peltor® LiteCom® II PMR446 Headset (Helmet Attachment Variant)
Used Peltor® LiteCom® II PMR446 Headset (Helmet Attachment Variant)Used Peltor® MT7H7A440 headset (helmet mount) with dynamic microphone in perfect technical working condition.Completely washed and disinfected, free from deposits and odors. The ear cushions are brand new.Note: A headband variant is available upon request.This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice. The statutory warranty is 12 months.As part of a full overhaul, the headset was disassembled into its individual sub-assemblies, cleaned, and reassembled. All technical sources of failure have been resolved. The earcup bodies, cables, and microphone have been chemically cleaned and are completely free from deposits, dirt, and odors.The headset is in good used condition and in perfect working order.Scope of Delivery:1 x Used Peltor® LiteCom® II headset, without original packaging, manual, or batteries.
Used Peltor® Tactical XP Headset (MT1H7F2-07 / MT1H7F2)
Used Peltor® Tactical XP Headset (MT1H7F2-07 / MT1H7F2)As part of a full overhaul conducted by Uwe Evers GmbH, the headset was disassembled into its individual sub-assemblies, cleaned, and reassembled. All technical sources of failure have been eliminated. The headset, cables, and microphone have been chemically cleaned and are completely free from deposits, dirt, and odors.The headset is in good used condition and in perfect working order.Note:This item is subject to the margin scheme for second-hand goods (§ 25a UStG). Therefore, VAT will not be shown separately on the invoice. The statutory warranty is 12 months.Scope of Delivery:1 x Used unit - Tactical XP headset (MT1H7F2-07 / MT1H7F2) with headband, 4-pin Nexus® jack plug, and dynamic boom microphone.