Professional repair services for Sennheiser® aero headsets
Important Notice: We are not a certified service partner of Sennheiser®. Sennheiser® is a registered trademark. Our services are not affiliated with the trademark owner.
Our services encompass the replacement of broken plugs, the repair of broken cables, and the removal of dirt and signs of use. Furthermore, we provide restoration services for classic Sennheiser® assemblies.
Cable Repair for Sennheiser® HMC-26
Repair / Replacement of technically worn-out cables – Rebuilding of cable grommets / bushings including materials and cleaning.Unfortunately, headsets continue to be used even with defective cable grommets. As a result, tensile forces that act on the battery housing or the ear cup via the cables are not transferred to the housing, but directly to the circuit board's plug connections. These are very delicate. If the cable connections to the circuit board are forcibly separated, an economical repair is questionable. Uwe Evers GmbH offers a sustainable repair service for this purpose. Acting in a timely manner has an advantage!
Connector Repair on Sennheiser® Headsets
Repair of Sennheiser® Headset Jack PlugsEven with Sennheiser® headsets, strong mechanical force, such as pulling, pinching, or stepping on them, can lead to defective jack plugs.Uwe Evers GmbH replaces defective plug components and overmolds the plug housings using the overmolding process to ensure a maximum lifespan.
Repair and Chemical Cleaning for Sennheiser® MD 421 Microphones
Repair, General Overhaul, and Chemical Cleaning for Sennheiser® MD 421 Series Microphones StarCom1 offers a comprehensive service for older Sennheiser® MD 421 microphones. Thanks to their exceptionally robust and modular design, only a few components are typically subject to age-related wear. These include the internal wiring and the rear coupling socket for the microphone cable.Due to their age or unknown origin, hygiene is often a concern. The front metal cage with its fine-mesh grille is an ideal place for coarse and fine dirt, as well as fungal cultures, to accumulate.As part of a general overhaul, StarCom1 disassembles the Sennheiser® MD 421 microphone into its individual components. All non-electrical parts are subjected to a chemical cleaning. The internal wiring is replaced with a new one. The rear connector segment is cleaned of all external deposits using an ultrasonic process. The rear axial switch is checked for smooth operation and good contact, and is repaired if necessary.Important Note: We do not offer individual spare parts for sale, as they are practically no longer available. For incomplete or mechanically defective microphones, a repair is only economically viable in the rarest of cases.If you are looking for special solutions or other repair services, please contact us.
Sennheiser® Ear Cups for HME / HMD / HMEC Series
Replacement Ear Pads for Sennheiser® HME / HMD / HMEC SeriesThese replacement ear pads are compatible with many older headsets from the noiseguard Aero line and have an asymmetrical shape with a slightly flattened side.The ear pads are compatible with the following headset models:HME 100 / 105 / 110 / 120HMD 120HMEC 300 / 305, C-400, 460 etc.
Sennheiser® headband cushion for HME / HMD / HMEC series
Replacement Headband Cushion compatible with Sennheiser® HME / HMD / HMEC series Series This headband cushion fits many older headsets of the Sennheiser® HME, HMD, and HMEC series, including:HME 100/105/110/120HMD 120HMEC 300/305, C-400, 460, etc.
Service for Sennheiser® HMEC / HMDC Series
Repair, Modification and Service for Sennheiser® Noiseguard® Headsets HMEC 300, 305, C 400, HMDC 322Uwe Evers GmbH offers a comprehensive service for your Sennheiser® Noiseguard® headsets of the HMEC (300, 305, C 400) and HMDC 322 series, which includes:Chemical cleaning of all assembliesModification of the internal electronics from an on-board power supply to an external battery power supplyReplacement of the XLR lead with a USB connector for universal use
Washing, Cleaning, and Disinfection for Sennheiser® Headsets
Professional Cleaning and Refurbishment of Sennheiser® Aero HeadsetsDo you have a used Sennheiser® Aero Headset that needs a thorough cleaning?We'll take care of it!Our services:Washing and CleaningDisinfectionOther work to restore your headset to a like-new conditionPrice based on effort. Contact us now for a personalized quote!
Windscreen compatible with Sennheiser® HME/HMD/HMEC Series
Windscreen compatible with Sennheiser® HME/HMD/HMEC SeriesThis windscreen fits many older headsets from the noiseguard Aero line, including:HME 100 / 105 / 110 / 120HMD 120HMEC 300 / 305, C-400, 460 etc.Please note that we are not a certified service partner of Sennheiser®. Sennheiser® is a registered trademark (Nice Classification 9) and the property of Sennheiser® electronic GmbH & Co. KG. The products and services offered here are in no way affiliated with Sennheiser® electronic GmbH & Co. KG.