Go to homepage
€0.00
Skip image gallery
Several 3M® / Peltor® MT-53 microphones are shown here disassembled into individual parts. These have been cleaned, disinfected, and technically overhauled by StarCom1 and are now ready for final assembly
A heavily soiled Peltor® MT-53 microphone was sent to StarCom1 for cleaning, disinfection, and repair as part of a revision. The focus is on the side of the microphone to be spoken into
Four Peltor® MT-53 microphones are shown here lying flat. They display typical soiling, for example from the work environment or adhesive tape residue
A Peltor® MT-53 microphone is shown here lying flat. It shows soiling from adhesive tape residue
Several 3M® / Peltor® MT-53 microphones are shown here disassembled into individual parts. These have been cleaned, disinfected, and technically overhauled by StarCom1 and are now ready for final assembly
A heavily soiled Peltor® MT-53 microphone was sent to StarCom1 for cleaning, disinfection, and repair as part of a revision. The focus is on the side of the microphone to be spoken into
Four Peltor® MT-53 microphones are shown here lying flat. They display typical soiling, for example from the work environment or adhesive tape residue
A Peltor® MT-53 microphone is shown here lying flat. It shows soiling from adhesive tape residue

€32.95

Product number: 950731

Repair / exchange service for Peltor® MT-53 microphone. 

MT-53 microphone exchange service by Uwe Evers GmbH You send us your defective, dirty MT-53 microphone and receive a refurbished and cleaned MT-53 microphone in exchange.

As part of the cleaning process, the MT-53 microphone is dismantled into its individual parts, chemically cleaned, and reassembled. The internal electrical microphone capsule is replaced with a new one.

After the overhaul, the microphone is free of buildup, dirt, and odors.

Scope of delivery:

  • 1 x Refurbished Peltor® MT-53 electret microphone (exchange service only - no new parts provided).

The microphone overhaul usually takes 4-5 working days after order approval by our accounting department.

After your online order has been placed, we will contact you and inform you of the delivery address to which you can send your microphones.

Please also see our LiteCom® Headset revision service for basic overhaul options. 

Contact us for details.

Disclaimer: We are not a certified service partner of 3M® / Peltor®. Our compatible products and services originate from Uwe Evers GmbH and are not affiliated with the trademark owner, 3M® / Peltor®.

Manufacturer and Information Obligation according to Art. 19 GPSR

Manufacturer:

Uwe Evers GmbH
Dipl.-Ing. Uwe Evers
Norderneystr. 20
26603 Aurich
Germany
Email: info@uwe-evers-gmbh.de

This website uses cookies to ensure the best experience possible. More information...